62648
30
Zoom out
Zoom in
Previous page
1/32
Next page
30
|
KDC-W7541U/KDC-W7541UY/KDC-W7041U/KDC-W7141UY
Troubleshooting Guide
Some functions of this unit may be disabled by
some settings made on this unit.
! Cannot set up the subwoofer.
• Cannot set up the High Pass Filter.
Cannot set up the Fader.
No Audio control effect on AUX.
Preout is not set to subwoofer. “MENU” > “SWPRE”
of <Function Control> (page 6)
<Subwoofer output> of <Basic Operation> (page 4)
is not set to On.
The Dual zone function is enabled. <Audio
Setup> (page 20)
! Cannot set up the subwoofer phase.
The Low Pass Filter is set to Through. <Audio
Setup> (page 20)
! Cannot select the output destination of the
subsource in the Dual zone.
Cannot adjust the volume of the rear speakers.
The Dual zone function is disabled. <Audio
Setup> (page 20)
! Cannot register a security code.
Cannot set up Display Illumination Control.
<Demonstration mode Setting> (page 18) is not
turned off.
! Cannot set up the Power-off timer.
<Security Code> (page 16) is not set.
What might seem to be a malfunction in your unit
may just be the result of slight misoperation or
miswiring. Before calling service, first check the
following table for possible problems.
General
? The Touch Sensor Tone does not sound.
The preout jack is being used.
The Touch Sensor Tone cannot be output from
the preout jack.
? The illumination flashes when the knob or button
is operated.
This is the key illumination effect.
You set this effect in “MENU” > “ILM Effect” of
<Function Control> (page 6).
Tuner source
? Radio reception is poor.
The car antenna is not extended.
Pull the antenna out all the way.
Disc source
? The specified disc does not play, but another one
plays instead.
The specified CD is quite dirty.
Clean the CD, referring to the CD cleaning of the
section on <Handling CDs> (page 3).
The disc is loaded in a different slot from that
specified.
Eject the disc magazine and check the number
for the specified disc.
The disc is severely scratched.
Try another disc instead.
Audio file source
? The sound skips when an Audio file is being
played.
The media is scratched or dirty.
Clean the media, referring to the CD cleaning of
the section on <Handling CDs> (page 3).
The recording condition is bad.
Record the media again or use another media.
? Noise is heard when carrying out Folder Search.
Noise may be produced if folders without audio files
exist continuously in the playing media.
Do not make folders without audio files.
B64-4049-00_00_E_English.indd 30B64-4049-00_00_E_English.indd 30 08.2.5 4:25:10 PM08.2.5 4:25:10 PM
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KDC-W7541U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KDC-W7541U in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood KDC-W7541U

Kenwood KDC-W7541U User Manual - German, Dutch, French - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info