36082
14
Zoom out
Zoom in
Previous page
1/16
Next page
PROBLEMA CAUSA POSIBLE SOLUCION
El sonido salta debido a
vibraciones.
El aparato está montado en un lugar
inclinado.
El cambiador está montado en un
lugar inestable.
Los conmutadores de ajuste de
ángulo están mal ajustados.
Monte el aparato en un lugar
nivelado.
Monte el aparato en un lugar estable.
Ponga los conmutadores de ajuste de
ángulo en las posiciones correctas.
PROBLEMA CAUSA PROVÁVEL SOLUÇÃO
O som pula devido à vibração. •O aparelho foi instalado numa
inclinação.
•O changer foi instalado num local
instável.
Os comutadores de ajuste de
ângulo foram fixados
incorretamente.
Instalar o aparelho de maneira a ficar
nivelado.
Instalar o aparelho num local estável.
Fixar os comutadores de ajuste de
ângulo nas posições corretas.
Cuando extraiga el cambiador de CD, asegúrese de expulsar primero el cargador y luego desenchufar el cable del
cambiador. No se olvide de poner los tornillos de transporte antes de transportar el cambiador de CD.
El cambiador de CD puede estropearse durante el transporte si se deja un cargador o CD en sı interior o si no se han
colocado los tornillos de transporte.
Antes de remover o trocador de discos, ejectar sem falta o carregador e, então, desconectar o cabo de alimentação.
Não esquecer de fixar os parafusos para transporte antes de deslocar o trocador de discos.
O trocador de discos pode ser danificado durante o transporte caso o carregador ou um disco fique dentro ou os
parafusos para transporte não sejam fixados.
PROBLEME CAUSE POSSIBLE SOLUTION
Le son saute à cause de
vibrations.
•L’appareil est incliné.
Le changeur est placé dans un
endroit instable.
Les commutateurs de réglage
d’angle ne sont pas dans la bonne
position.
Monter l’appareil sur une surface
parfaitement plate.
Monter l’appareil dans un endroit
stable.
Mettre les commutateurs de réglage
dans la position qui convient.
Avant de déposer le changeur de CD, veillez à éjecter le chargeur puis à débrancher le câble de liaison du changeur.
Cela fait, fixez les vis de transport sur le changeur de CD avant de le déplacer.
Le changeur de CD peut être endommagé pendant le transport si le chargeur ou le CD ne sont pas préalablement
retirés, ou bien encore si les vis de transport ne sont pas correctement fixées.
PROBLEM POSSIBLE CAUSE SOLUTION
Sound skips due to vibration. The unit is mounted at a slant.
Changer unit is mounted in an
unstable place.
The angle adjustment switches are
set improperly.
Mount the unit so that is level.
Mount the unit in a stable place.
Set the angle adjustment switches
to the correct positions.
When removing the CD changer, be sure to first eject a magazine then unplug the changer cord. Do not forget to
attach the transport screws before transporting the CD changer.
The CD changer may be damaged during transport if a magazine or CD is left inside it or the transport screws are
not attached.
Troubleshooting Guide / Guide de depannage / Guia
Sobre Localización De Averias / Guia de Diagnóstico
14
KDC-C719(KWEW)(EFSP) 2002.10.03 05:26 PM Page 14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KDC-C469 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KDC-C469 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood KDC-C469

Kenwood KDC-C469 User Manual - German, Dutch, Italian - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info