Manual Kenwood JKP300 series (page 3 of 64) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

510764

Zoom out

Zoom in

1/64

Plug in and switch on. The indicator

light will come on.

Your kettle will boil and switch off

utomatically. To re-boil, wait a few

seconds - the on/off switch needs

ime to reset.

ote - To interrupt the boiling

ensure that the switch is in

he off position before

emoving from the power

base.

●

If you experience problems

with your kettle switching on

and off during use or

switching off before boiling,

check that the flat element is

free from scale - see

“descaling”.

●

Your kettle is fitted with a filter to

hold back limescale particles.

●

If you find drops of water under your

kettle, don’t worry - it is just

condensation.

boil-dry protection

●

If you switch on with too little water,

your kettle will cut out automatically.

Switch off, remove from the

powerbase and let it cool down

before re-filling. When it has cooled

down, the switch will reset itself.

care and cleaning

●

Before cleaning, unplug your kettle

and let it cool down.

the outside and powerbase

●

Wipe with a damp cloth, then dry.

Do not use abrasives - they will

scratch the metal and plastic

surfaces.

the inside

●

Even though your kettle comes with

a filter, you still need to clean the

inside (and the filter) regularly.

the filter

1 Open the lid. Press the lid release

button ቤ.

2 Remove the filter by holding the tab

ᕢ and then lifting the filter out.

3 either rinse under the tap or use a

soft brush.

or when descaling your kettle, drop

the filter in too. Rinse thoroughly.

Replace the filter by locating the

front of the filter into the spout area

nd then clip into place ᕣ.

escaling

●

egular descaling of the flat element

will improve the performance of your

ettle. If the kettle is not descaled

egularly the build up of limescale

may result in the following:

●

problems may be experienced

with the kettle switching on and

off during use or switching off

before boiling.

●

the kettle may take longer to boil.

●

the flat element may be damaged.

Please note: Failure to descale your

kettle may invalidate your guarantee.

●

When limescale starts to build up on

the heating element, buy a suitable

descaler and descale your kettle.

After descaling, boil with fresh water

several times and discard. Clean any

descaler off the kettle - it can

damage the parts.

●

Some regions of the country have

chalky water. This makes boiled

water look cloudy and leaves a

deposit on the side of the kettle. This

is normal but can be removed with

regular cleaning.

●

Alternatively, to reduce limescale

build up, use filtered water to fill your

kettle.

service and customer

care

●

If the cord is damaged it must, for

safety reasons, be replaced by

KENWOOD or an authorised

KENWOOD repairer.

If you need help with:

●

using your appliance or

●

servicing or repairs

●

Contact the shop where you bought

your appliance.

●

Designed and engineered by

Kenwood in the UK.

●

Made in China.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood JKP300 series in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood JKP300 series Manual

Product: