before using your induction
hob for the first time
Wipe over the hob plate see ‘care &
cleaning’.
key
ቢ hob plate
ባ pan guide
ቤ control panel
ብ LED display
ቦ timer decrease button
ቧ timer increase button
ቨ timer button
ቩ on/off button
ቪ power control
using your induction hob
1 Plug in the induction hob. The
appliance will beep and the fan will
operate for a second.
2Press the on/off button ቩ, the
button will flash and the LED display
ብ will read ––:––. It will remain with
this reading unless in timer mode.
The appliance is now in standby
mode.
3 Place the pan centrally onto the
induction hob, within the pan guide -
shown by the graphic on the hob
plate ባ.
4 Select the desired power setting with
the power control ቪ and heating will
begin.
●
To adjust the power, turn the power
control anticlockwise to decrease the
power and clockwise to increase the
power. There are 6 power settings.
●
Note: When the induction hob is
working, there will be a high
frequency intermittent sound and the
fan will operate. This is normal.
5Turn off the induction hob when you
have finished cooking by pressing
the on/off button.
●
The fan will continue to operate after
the appliance has been switched off.
●
As this induction hob operates
slightly differently to a traditional hob,
some adjustments to the expected
cooking times and temperatures
may be necessary to achieve the
desired results.
hints
●
To reduce the cooking time, you can
turn the power control to the max
position when you turn the appliance
on. After a short time you can set
the power control to the required
position.
●
After a short period of use,
experience will teach you which
setting is the right one for your
needs.
●
Pan contents heat more quickly with
an induction hob.
timer mode
1 When the timer button ቨ is pressed
it will light up, the appliance will
beep, the LED display ብ flashes and
shows “00:00”. Set the time using
the “+” ቧ or “-” ቦ button, “+” will
increase the time by 1 minute, “-”
will decrease the time by 1 minute.
To quickly set the time in 10 minute
increments hold the “+” or “-” button
down. This should be done within 5
seconds of pressing the timer button
or the LED display will default back
to ––:––. The timer range is
1 minute - 3 hours.
2Once the timer has been set the
LED display will flash. Select the
desired power level within 5 seconds
(if not timing will not begin and the
appliance will automatically turn off
within 2 minutes). The display will
then count down (indicated by the
colon flashing) and heating will
begin.
3After the set time has been reached,
the appliance will turn off.
4
