Manual Kenwood HM 790 series (page 3 of 5) (English)

510828

Zoom out

Zoom in

1/5

before using your Kenwood appliance

●

Read these instructions carefully and retain for future

reference.

●

Remove all packaging and any labels.

safety

●

Ensure the cord is fully unwound from the cord wrap

before using the handmixer.

●

Never put the handmixer body in water or let the cord

or plug get wet.

●

Keep fingers, hair, clothing and utensils away from

moving parts.

●

Never let the cord touch hot surfaces or hang down

where a child could grab it.

●

Never use a damaged handmixer. Get it checked or

repaired: see 'service and customer care'.

●

Never use an unauthorised attachment.

●

Always unplug the appliance when not in use, before

fitting or removing parts or before cleaning.

●

This appliance is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person

responsible for their safety.

●

Children should be supervised to ensure that they do

not play with the appliance.

●

Only use the appliance for its intended domestic use.

Kenwood will not accept any liability if the appliance is

subject to improper use, or failure to comply with these

instructions.

before plugging in

●

Make sure your electricity supply is the same as the

one shown on the underside of your handmixer.

Important – UK only

●

The wires in the cord are coloured as follows:

Blue = Neutral, Brown = Live.

●

The appliance must be protected by a 3A approved

(BS1362) fuse.

Note:

●

For non-rewireable plugs the fuse cover MUST be

refitted when replacing the fuse. If the fuse cover is lost

then the plug must not be used until a replacement can

be obtained. The correct fuse cover is identified by

colour and a replacement may be obtained from your

Kenwood Authorised Repairer (see Service).

●

If a non-rewireable plug is cut off it must be

DESTROYED IMMEDIATELY. An electric shock hazard

may arise if an unwanted non-rewireable plug is

inadvertently inserted into a 13A socket outlet.

●

This appliance conforms to EC directive 2004/108/EC

on Electromagnetic Compatibility and EC regulation no.

1935/2004 of 27/10/2004 on materials intended for

contact with food.

before using your handmixer for the first time

●

Wash the parts (see 'cleaning').

key

ቢ speed switch

ባ tool release button

ቤ beaters

ብ cord wrap

ቦ kneader with additional collar

ቧ kneader without additional collar

ቨ beater storage pillars

ቩ kneader storage pillars

ቪ worktop storage unit

ቫ cord clip

to use your handmixer

1 Unwrap the cord from the cord wrap and make sure

the speed switch is in the off position by lining up the O

symbol on the handmixer body with the dot on the side

of the speed switch. Insert the beaters or kneaders –

turn and push until a positive click is felt. The tabs on

the tool shafts need to line up with the outlet holes.

Important: The kneader with the additional collar will

only fit into the larger outlet hole.

2 Plug in.

3 With the ingredients in a suitably sized bowl, place the

beaters/kneaders into the bowl.

4 Pull the speed switch backwards to reach the desired

speed (the first dot on the handmixer body is slow and

speed 5 is fast). Line up the dot on the side of the

speed switch with the corresponding speed.

●

As the mixture thickens, increase the speed.

●

If the machine labours increase the speed.

●

Move the speed switch forwards to the pulse position

(P) to operate the motor as required. The motor will

operate for as long as the pulse is held in position.

5 When the mixture has reached the desired

consistency, return the speed switch to the off position

and then lift the beaters/kneaders out of the bowl.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood HM 790 series in the language / languages: English as an attachment in your email.

The manual is 0,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood HM 790 series Manual

Product: