159919
45
Zoom out
Zoom in
Previous page
1/48
Next page
Important Items
45
EN
In case of difficulty
What seems to be a malfunction is not always so. Before calling for service, check the following table
according to the symptom of your trouble.
Operation to reset
The microcomputer may fall into malfunction (impossi-
bility to operate, erroneous display, etc.) when the
power cord is unplugged while unit is ON or due to an
external factor. In this case, execute the following pro-
cedure to reset the microcomputer and return it to nor-
mal condition.
Unplug the power cord from the power outlet, then
while holding the POWER or
key depressed, plug
the power cord again.
÷ Please note that resetting the microcomputer
clears the contents stored in and it returns to condi-
tion when it left the factory.
or
After resetting the microcomputer, the display will show
as follow:
standby/timer
POWER
standby/timer
Sound is not produced.
The "standby/timer" indicator blinks in red and
no sound is output.
The "standby/timer" indicator blinks in green.
No sound from the headphones.
Sound is not produced from the left or right
speakers.
The clock display blinks without changing the
figures.
Timer operation is not possible.
÷ Connect properly referring to "System connections".
6
÷ Adjust to a required volume. $
÷ Switch MUTE OFF. %
÷ Unplug the headphone plug.
÷ A speaker cord is short-circuited. Turn power off and re-connect
the speaker cord.
÷ Adjust the present time again.
÷ Set the timer ON/OFF time properly
÷ Insert correctly. %
÷ Adjust to a required volume. $
÷ Connect properly referring to "System connections". 6
÷ Adjust the present time again.
÷ Adjust the present time referring to "Clock adjustment".
÷ Set the timer ON time and OFF time.
÷ Connect antennas. 78
÷ Select a band. )
÷ Tune to the frequency of the desired station. )
÷ Install the outdoor antenna in an apart position from the road.
÷ Switch the suspected electric appliance OFF.
÷ Install the TV or the system at an increased distance between
them.
÷ Preset stations with tunable frequencies.
¡
÷ Preset stations again. ¡
Radio stations cannot be received.
Noise interferes.
A station has been preset but it cannot be re-
ceived by pressing the P.CALL key.
RemedySymptom
RemedySymptom
Amplifier section/Speakers
Tuner section
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood hm 335 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood hm 335 in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info