536419
2
Zoom out
Zoom in
Previous page
1/116
Next page
2
|
CMOS-310/CMOS-210
When mounting this unit, make sure none of the leads are
trapped between this unit and the surrounding metalwork
or  ttings.
Do not mount this unit near the heater outlet, where
it would be a ected by heat, or near the doors, where
rainwater might splash onto it. (Never install in locations
such as the above because of the danger of malfunction
due to high temperatures.)
Before drilling any mounting holes always check behind
where you want to drill the holes. Do not drill into the gas
line, brake line, electrical wiring or other important parts.
If this unit is installed in the passenger compartment,
anchor it securely so it does not break free while the car is
moving, and cause injury or an accident.
If this unit is installed under a front seat, make sure it does
not obstruct seat movement. Route all leads and cords
carefully around the sliding mechanism so they do not get
caught or pinched in the mechanism and cause a short
circuit.
Care and maintenance
When the product gets dirty, wipe dry with a silicon cloth
or soft cloth. If it is seriously stained, remove stain with
a cloth moistened with a neutral cleaner and then wipe
the cleaner away. Do not use a hard cloth and/or a volatile
substance such as lacquer thinner or alcohol, scratches,
deformation, degradation and/or damage may result.
When a lens component gets dirty, wipe gently with a soft
cloth moistened with water. Do not rub with a dry cloth to
prevent scratching the lens.
Installation Procedure
1 To prevent a short circuit, remove the key from the
ignition and disconnect the - battery.
2 Make the proper input and output wire connections
for each unit.
3 Connect the wiring harness wires in the following
order: ground, ignition and camera unit.
4 Install the unit in your car.
5 Reconnect the - battery.
WARNING
If you connect the ignition wire (Red) to the car chassis
(Ground), you may cause a short circuit, that in turn may
start a  re. Always connect those wires to the power source
running through the fuse box.
Do not cut out the fuse from the ignition wire (Red). The
power supply must be connected to the wires via the fuse.
WARNING
To prevent injury or fire, take the following
precautions:
To prevent a short circuit, never put or leave any metallic
objects (such as coins or metal tools) inside the unit.
Installation and wiring of this product require specialist
skill and experience. To assure your safety, please request a
specialist technician to install the unit.
CAUTION
To prevent damage to the product, take the
following precautions:
Make sure to ground the unit to a negative 12V DC power
supply.
When replacing a fuse, only use a new fuse with the
prescribed rating. Using a fuse with the wrong rating may
cause your unit to malfunction.
Do not use your own screws. Use only the screws provided.
If you use the wrong screws, you could damage the unit.
NOTE
This product is a rear view camera for checking the view at
the rear of a car.
A rear view camera is a camera that provides symmetrical
images in the same way as rear and side view mirrors.
Connection to a TV with an RCA video input is possible,
but con rm whether the TV you use has a reverse gear
connection function.
This product is designed to supplement the driver’s rear
view, but the camera images do not show all dangers and
obstacles. Be sure to look behind you when reversing to
con rm the view.
This product features a wide-angle lens, so the near view
is wide and the far view is narrow, which may create a
false sense of distance. Be sure to look behind you when
reversing to con rm the view.
Do not wash your car with an automatic car wash or
high-pressure water as it may result in water entering the
camera or the camera falling o .
Check camera bracket installation before driving.
Are the screws loose?
- Is the camera bracket  rmly secured?
- If the rear view camera comes loose while you are driving
it may cause an accident.
Before  nally installing the unit, connect the wiring
temporarily, making sure it is all connected up properly,
and the unit and the system work.
Before Use/ Installation Procedure
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood CMOS 310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood CMOS 310 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info