510855
5
Zoom out
Zoom in
Previous page
1/12
Next page
b
efore plugging in
Make sure your electricity supply is
t
he same as the one shown on the
u
nderside of the appliance.
I
mportant - UK only
The wires in the cord are coloured
a
s follows:
B
lue = Neutral
Brown = Live.
The appliance must be protected by
a 13A approved (BS1362) fuse.
Note:
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
key
blender
filler cap
locking lid
pouring slots
goblet
blender sealing ring
blender blade unit
power unit
speed + pulse control
ice crushing button
cord storage
m
ulti mill (if supplied)
blender sealing ring
blender blade assembly
multi mill jar
g
rinding mill (if supplied)
mill jar
grinding mill blade assembly
g
rating mill (if supplied)
mill jar
grating mill blade assembly
soft fruit filter attachment
(if supplied)
soft fruit filter
to use your blender
Use your blender for soups, drinks,
pâtés, mayonnaise, breadcrumbs,
biscuit crumbs, chopping nuts and
crushing ice.
1 Fit the blender sealing ring into
the blender blade unit - ensuring
the seal is located correctly in the
grooved area.
Leaking will occur if the seal
is damaged or incorrectly
fitted.
2 Screw the blade assembly onto the
goblet ensuring the blade
assembly is fully tightened
. Refer
to the graphics on the underside of
the blade unit as follows:
- unlocked position
- locked position
3 Put your ingredients into the goblet.
4 Put the filler cap in the lid.
5 Fit the lid to the goblet and turn
clockwise to lock.
6 Place the blender onto the power
unit with the handle situated to the
right hand side and lock by turning
clockwise until you hear a “click”
.
The appliance won’t work if
the blender is incorrectly
fitted.
7 Select a speed (refer to the
recommended speed chart).
4
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood BL480 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood BL480 in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info