ቢ pusher
ባ feed tube
ቤ lid
ብ pulp shield
ቦ grater plate
ቧ filter
ቨ pulp spout
ቩ bowl
ቪ juice spout
ቫ base
ቭ clip
safety
●
Never put your fingers in the feed
tube. Use the pusher supplied.
●
Fit the clip over the lid before
switching on.
●
Don’t remove the lid until the filter
has stopped.
●
Don’t touch moving parts.
●
Unplug before fitting or removing
parts or cleaning.
important
●
Don’t process more than 4.5kg
(10lb) at a time. Switch off for 10
minutes between batches.
●
If pulp stops coming out, switch off
and unclog the bowl.
●
Citrus fruits will produce bitter juice
because their pith gets processed
too. The Kenwood citrus press
(A995) is recommended for citrus
fruits.
before using for the first time:
dismantle and clean
1 Undo the clip.
2 Remove the lid.
3 Using the top of the pusher, unscrew
the grater – turn clockwise.
4 Remove the filter.
5 Remove the bowl.
6 Wash the parts: see ‘Cleaning’.
to assemble and use
your juicer
1 Slot the bowl onto the base – align
the tabs with the cut outs in the
base ᕡ.
2 Insert the filter – align the tabs ᕢ.
3 Using the top of the pusher, screw
the grater on anticlockwise ᕣ.
4 Fit the lid ᕤ.
5 Swing the clip up and click shut ᕥ.
6 Slide the pulp shield on ᕦ.
7 Remove the high speed outlet
cover ᕧ.
8 Attach the juicer and turn until
locked on ᕨ.
9 Place containers under the spouts.
preparing food
●
Remove stones (eg. plums,
peaches, cherries).
●
Remove tough skins (eg melons,
pineapples, cucumbers, potatoes).
●
Soft-skinned and other food just
needs washing (eg apples, grapes,
pears, strawberries, cabbage,
carrots, celery, lettuce, parsley,
radishes, spinach).
10Cut the food to fit the feed tube.
11Switch to speed 1 and push the
food down with the pusher.
cleaning
●
Dismantle before cleaning.
●
Do not wash any parts in your
dishwasher.
●
Some foods, eg carrot, will discolour
the plastic. Rubbing with a cloth
dipped in vegetable oil helps remove
discolouring.
base
Never immerse in water. Wipe with a
damp cloth, then dry.
other parts
●
Wash by hand, then dry.
●
The bottom of your feed tube has
been individually trimmed to fit
perfectly. Because of this, it’s slightly
rough – this is normal.
English
Before reading, please unfold front page showing the illustrations
2