517402
13
Zoom out
Zoom in
Previous page
1/16
Next page
CARE OF YOUR COOLER
PUTTING ON NEW PAD (Fig. 21)
PADS NEED NO PREWETTING
THE
__. Put the lower roller in pad.
Fit the lower roller into the botton slots in the
frame
Push the top roller through the pad, Fit the roll
end over the pad motor shaft drive block
_. Push the top roller end into the bearing
Q Turn the bearing arm to hold the rolter_
TUCK THE PAD EDGES UNDER THE 2
GUIDES ON EACH SIDE
O Put the two small center rollers in place. Snap
the ends into the holders. (See lubrication
instructions below)
OILING (Fig.22)
Use SAE 20 Non-detergent motor oil once
per year.
1 Fill the two blower shaft bearing cups (_
2 Pot two or three drops in the two oil fiJl tubes on the
biower motor (_)(Motors without oil fill tubes
have ]ifetime lubric, ation)
3 Put two or three drops in the end bearing on each pad
motor (_
BLOWER BELT ADJUSTMENT (Fig. 23)
l CAUTION: DO NOT ADJUST BELT TENSION t
BY CHANGING THE DIAMETER OF THE
MOTOR PULLEY. ADJUST BELT TENSION
ONLY BY MOVING THE MOTOR BRACKET.
1 If you can easily move the belt over 1 inch. it
needs adjustment.
2 To adjust belt tension, loosen the three motor
mount bolts,
3 Push the motor to tighten the belt until belt
moves about 1/2inch with finger force
SEARS REPLACEMENT PADS
MODEL NUMBERSEARS PAD NUMBER
_ 661.623920 42-6293
661.624420 42-6293
661.624530
661.624630 42-6295
..... ._61.624670 42-6295
OIL
©
OiL HERE ON
EACH LOUVRE
4 Tighten the three motor mount bolts
13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenmore 661.624670 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenmore 661.624670 in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info