686272
5
Zoom out
Zoom in
Previous page
1/18
Next page
EN
1. PREFACE
1.1 General
Congratulations on choosing Minarc Evo welding equipment. Used correctly, Kemppi
products can signicantly increase the productivity of your welding, and provide years of
economical service.
This operating manual contains important information on the use, maintenance and safety of
your Kemppi product. The technical specications of the equipment can be found at the end
of the manual.
Please read the manual carefully before using the equipment for the rst time. For your
own safety and that of your working environment, pay particular attention to the safety
instructions in the manual.
Read also the separate Kemppi Safety Instructions booklet delivered in the product package.
Pay particular attention to the risks associated with re and explosion.
For more information on Kemppi products, contact Kemppi Oy, consult an authorised Kemppi
dealer, or visit the Kemppi web site at www.kemppi.com.
For Kemppi’s standard safety instructions and warranty terms and conditions, please visit our
web site at www.kemppi.com.
The specications presented in this manual are subject to change without prior notice.
NOTE! Items in the manual that require particular attention in order to minimise damage and
personal harm are indicated with this symbol. Read these sections carefully and follow their
instructions.
Disclaimer
While every eort has been made to ensure that the information contained in this guide
is accurate and complete, no liability can be accepted for any errors or omissions. Kemppi
reserves the right to change the specication of the product described at any time without
prior notice. Do not copy, record, reproduce or transmit the contents of this guide without
prior permission from Kemppi.
1.2 Product introduction
Minarc Evo 180 is an easy-to-use welding machine for MMA (stick welding). It is suitable
for professional use in metal industry, work sites and repair welding. Before use or doing
any maintenance work on the machine, read the operating manual and keep it for further
reference.
A separate voltage reduction device (VRD) model is also available. Minarc Evo 180VRD
includes VRD for maintaining the open-circuit voltage (OCD) at 30 volts. With AU models
(Australia, New Zealand) VRD for maintaining the open-circuit voltage at 12 volts is always
included.
Minarc Evo 180 tolerates uctuations in input voltage, and it is suitable for on-site work using
power generators and long power cables. The power source utilises PFC technology to ensure
optimum usage on a single phase power supplies. IGBT inverter design delivers reliable arc
ignition and welding performance with all electrode types.
Welding and earth return cables are supplied in the delivery package, including electrode
holder, earth clamps and connections.
Minarc Evo can also be used for basic TIG welding, where the TIG arc is started by the lift arc
ignition technique. Order numbers for the additional equipment required for TIG welding and
for the remote current control devices can be found in section 5 "Ordering codes".
© Kemppi Oy / 1438
3
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi Minarc Evo 180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi Minarc Evo 180 in the language / languages: English as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kemppi Minarc Evo 180

Kemppi Minarc Evo 180 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info