686373

Kemppi A7 Robot Gun Mount T4 Manual

5
Zoom out
Zoom in
Previous page
1/18
Next page
5
Robot Gun Mount T2, T4© Kemppi Oy 2017 1712
OPERATING MANUAL
5.4 Signs used in the documentation
Items in the manual that require particular attention, to
minimize damage and personal injury, are indicated with
a three-level notication and warning system. Read these
sections carefully, and follow the instructions.
Note: These items give the user a useful piece of
information.
Caution: A caution item describes a situation that may
result in damage to the equipment or system.
Warning: Warnings describe a potentially dangerous
situation. If not avoided, it will result in personal harm or
fatal injury.
5.5 Warning and notice signs
The following warning and notice signs can be found on
the product:
Read and observe the operating instructions!
These markings must always be legible. They must not be
covered, obscured, painted over, or removed.
5.6 Emergency instructions
In the event of an emergency, immediately interrupt the
following:
• The power supply
• The ow of compressed air
Further measures are described in the operating
instructions or in the documentation of other peripheral
devices.
5.7 Operation safety
Please study these operation safety instructions and
respect them when installing, operating, and servicing
the machine.
The welding arc and spatter
The welding arc harms unprotected eyes. Also be careful
with reecting ashes from the arc. The welding arc and
spatter burn unprotected skin. Wear safety gloves and
protective clothing.
Danger of re or explosion
Pay attention to re safety regulations. Remove ammable
or explosive materials from the welding location. Always
reserve sucient re-ghting equipment at the welding
location. Be prepared for hazards in special welding jobs –
for example, the danger of re or explosion in welding of
container-type work pieces.
Fire can break out from sparks even several hours after
the welding is done!
Cables
Always check the cables before operating the equipment.
Replace damaged cables without delay.
Damaged cables may cause injury or start a re. Connection
cables must not be compressed or come in contact with
sharp edges or hot work pieces.
The welding power circuit
Isolate yourself by using proper protective clothing, and
do not wear wet clothing. Never work on a wet surface or
use damaged cables. Do not place the MIG gun or welding
cables on the welding machine or on other electric
equipment. Do not press the MIG gun’s switch if the gun is
not directed towards a work piece.
Welding fumes
Make sure that there is sufficient ventilation during
welding. Take special safety precautions when welding
metals that contain lead, cadmium, zinc, mercury, or
beryllium.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi A7 Robot Gun Mount T4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi A7 Robot Gun Mount T4 in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info