686374

Kemppi A7 Robot Gun Mount T3 Manual

16
Zoom out
Zoom in
Previous page
1/21
Next page
16
Robot Gun Mount T3© Kemppi Oy 2016 1712
OPERATING MANUAL
14.1 Cleaning robot mount T3 with A7 MIG Gun 500-g
This section describes how to clean the robot mount with A7 MIG Gun 500-g.
Figure 10: Cleaning robot mount T3 with A7 MIG Gun 500-g
3
1
4
2
1. Cover ring
2. 2 set screws
3. Robot mount
4. O-ring
Serious injuries can be caused by parts articulating rapidly. When cleaning with
compressed air, wear suitable protective clothing – in particular, safety goggles.
Proceed as follows:
1. Clean the robot mount (3) with compressed air.
2. Turn the cover ring (1) to the right until the stop, and remove it.
3. Check the O-ring (4) for wear, and replace it if necessary.
4. Clean the bores of the set screws (2) with compressed air.
5. Check the set screws (2) for wear, and replace them if necessary.
6. Grease the O-rings (4) with sealing grease (included in the delivery).
7. Mount the set screws (2), O-ring (4), and cover ring (1).
14.2 Cleaning robot mount T3 with A7 MIG Gun 500-w
This section describes how to clean the T3 robot mount with A7 MIG Gun 500-w.
Figure 11: Cleaning robot mount T3 with A7 MIG Gun 500-w
1
8 7
2 5
36
4
1. Set screw, M3×3
2. 2 compression springs
3. 2 O-rings, 7×1.5
4. 4 O-rings, 3.5×1.5
5. 2 compression sleeves
6. 2 balls
7. Robot mount
8. Gas duct
Serious injuries can be caused by parts articulating rapidly. When cleaning with
compressed air, wear suitable protective clothing – in particular, safety goggles.
Proceed as follows:
1. Clean the robot mount (7) with compressed air.
2. Grease the O-rings (3) with sealing grease (included in the delivery).
3. Mount the O-rings (3 and 4) on the compression sleeves (5).
4. Mount the balls (6), compression springs (2), and compression sleeves (5).
5. Detach the set screw (1) and gas duct (8), and check them, replacing if necessary.
6. Attach the set screw (1) and gas duct.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi A7 Robot Gun Mount T3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi A7 Robot Gun Mount T3 in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info