686365
15
Zoom out
Zoom in
Previous page
1/21
Next page
15
A7 MIG Gun 500-w© Kemppi Oy 2017 1712
OPERATING MANUAL
12.3 Maintenance and cleaning
Scheduled maintenance and cleaning are prerequisites for
a long service life and trouble-free operation.
Once a month, thoroughly clean the robot mount to
remove all dirt and welding spatter.
Risk of injury due to unexpected start-up
For the entire duration of maintenance, servicing,
unmounting, and repair work, the following instructions
must be adhered to:
Switch o the power supply.
Cut o the compressed air supply.
Pull the power plug.
Electric shock
Dangerous voltages can be produced because of defective
cables.
Check all live cables and connections for proper
installation.
Replace any parts that have become damaged or
worn or suered deformation.
The maintenance intervals listed are recommended
values and assume single-shift operation.
Maintenance and cleaning work may only be
carried out by qualied and trained specialists.
Always wear your personal protective clothing
when performing maintenance and cleaning
work.
Remove adhering welding spatter.
Check all screw joints for a tight t.
Contact a Kemppi authorized service provider for
further assistance.
The maintenance intervals stated are
recommended values and assume single-shift
operation.
Maintenance and cleaning work may only be
carried out by qualied and trained specialists.
Always wear your personal protective clothing
when performing maintenance and cleaning
work.
Remove adhering welding spatter.
Check all screw joints for a tight t.
Contact a Kemppi authorized service provider for
further assistance.
12.3.1 Cleaning the wire guide
This section describes how to clean the wire guide.
Risk of injury
Serious injuries can be caused by parts articulating rapidly.
When cleaning the wire guide with compressed air, wear
suitable protective clothing – in particular, safety goggles.
Proceed as follows:
1. Unscrew the hose assembly from the machine side,
and lay it straight.
2. Unscrew the retaining nut, and pull out the wire
liner or PA liner.
3. Clean the wire feed hose from both sides with
compressed air.
4. Slide the adjusted wire liner or PA liner into the wire
feed hose, and secure with a retaining nut.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi A7 MIG gun - 500w at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi A7 MIG gun - 500w in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info