Manual Kemppi A3 MIG Welder (page 3 of 22) (English)

686377

Zoom out

Zoom in

1/22

A3 MIG Welder© Kemppi Oy 2018 1826

INTEGRATION GUIDE

1. INTRODUCTION

The A3 MIG Welder is a complete welding system for robotic welding applications.

This guide, together with the A3 MIG Welder operating manual, instructs you on how to

set up the system and perform the necessary cable connections and setup conguration

to get the system running.

Important notes

Items in the manual that require particular attention for minimizing damage and harm

are indicated with the symbols below. Read these sections carefully, and follow their

instructions.

Note: A note item gives the user a useful piece of information.

Caution: Caution items describe a situation that may result in damage to the equipment

or system.

Warning: Warnings describe a potentially dangerous situation. If not avoided, it will

result in personal harm or fatal injury.

Disclaimer

While every eort has been made to ensure that the information contained in this guide

is accurate and complete, no liability can be accepted for any errors or omissions. Kemppi

reserves the right to change the specication of the product described, at any time,

without notice. Do not copy, record, reproduce, or transmit the contents of this guide

without prior permission from Kemppi.

2. INTEGRATION STEP BY STEP

To ensure safe and ecient integration of the welding system, follow these simple

steps:

1. INSTALL HARDWARE

• Make sure that all the components are OK.

• Attach all required equipment to the robot and to the

welding cell.

• Make all required cable connections.

2. CONFIGURE THE SYSTEM

• Congure the sensors and devices.

• Congure the eldbus.

• Power up the system.

• Congure the power source.

After completion of these steps, the system is ready for welding.

For detailed instructions on each of the steps, consult the corresponding section of

this document.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi A3 MIG Welder in the language / languages: English as an attachment in your email.

The manual is 2,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kemppi A3 MIG Welder Manual

Product: