Manual Kemper 6541091 (page 15 of 60) (English, German, French, Italian, Spanish, Norwegian)

778309

Zoom out

Zoom in

1/60

DT ISTR_6541091_04/21 15/60

• In case you leave the appliance unused for a long time, isolate the burner (i.e. by using a plastic bag) in

order to avoid the insects’ nest-building and the dusting for which the manufacturer doesn’t take the

responsibility.

• To clean the injector and the duct of the pilot flame, remove the

protective metal mesh. On the right side of the valve, in a steel

tube of about 1 cm in diameter, is located a small copper tube

curved. Unscrew the retaining screw, remove the copper tubing

and blow compressed air inside the steel tube.

• It may be necessary to clean the brass injector mounted on

copper tubing, but this should only be performed by qualified

personnel.

• Heat the brass injector with a lighter to melt the glue.

• After this operation, the injector will be hot and then unscrew it

with pliers or gloves.

• Clean the injector with liquid detergent (can be used detergent

for flooring), rinse with running water and dry it by blowing

compressed air.

Screw the injector by applying a drop of sealing fillets or loktite

on the thread of copper tubing.

• CAUTION: Do not exceed with the seal fillets because abundant

drippings of liquid could clog the injector hole again.

Reassemble everything pushing up the injector in order to pass

the locking screw that, once screwed without tightening

exaggerated, will only keep the injector into the correct position.

• If necessary, contact the assistance office.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kemper 6541091 in the language / languages: English, German, French, Italian, Spanish, Norwegian as an attachment in your email.

The manual is 1.45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kemper 6541091 Manual

Product: