Manual Kelvinator KWH20CRC (page 17 of 20) (English)

478066

Zoom out

Zoom in

1/20

1. Remove the one fixing screws from the frame (See Fig.5).

2. Grasp the left corner of the frame's underside, then loosen the frame and carefully disconnect

the connecto

r (See Fig.6).

1. Hold the slot under the front panel, then uplift it outwards, and remove the front panel (See Fig.3).

2. Pinch the handle under the air filter and make the air filter arched, remove it fro

m the slot from

underside to upside (See Fig.4).

Fig. 3

Fig

4 Fig. 5

Fig

In-line Connector

1. Remove the fixing screws on the chassis fixing brackets and remove the two screws on the

back of cabinet (If fitted. These screws are not needed to install in later installation), then

remove the chassis fixing brackets (See Fig.7).

2. Grasp the handle on the chassis and carefully slide the air conditioner out of the cabinet

(See Fig.8).

3. Push the unit chassis into the cabinet (See Fig.9).

4. Fix the chassis with the screws previously removed as they were prior to removal.

1. Install the frame making sure not to interfere with the

temperature sensor (See Fig.10).

2. Fix the screws on the frame (See Fig.5). For ≥ 3.5kW/h

models, the screws are supplied with the unit.

1. Install the air filter into the frame's slot from upside to

underside (See Fig.4).

2. Hang the front panel on the frame's buckle, then press the

front panel into the frame's slot until you hear a click (See Fig11).

Fig. 9

Fig. 10

Fig.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kelvinator KWH20CRC in the language / languages: English as an attachment in your email.

The manual is 4,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kelvinator KWH20CRC Manual

Product: