771568
30
Zoom out
Zoom in
Previous page
1/32
Next page
SECTION 8 - BREAKDOWN DIAGNOSTIC
When the failure cannot be easily solved, you have to disconnect the equipment from electrical power and contact the distributor
company or an authorized technical assistance centre, having care of quoting the identification data of the unit that you can find
on the correspondent label.
SYMPTOMS POSSIBLE CAUSE
Fans not running
No power supply.
The switches of the thermostat are not in the right position of working.
There are foreign bodies that block the rotors.
Electrical connections are released.
Poor cooling / heating
performance Too low airflow.
Insufficient refrigerant fill (check refrigerant circuit).
Compressor off (check outdoor condenser unit).
Excessive air flow Pressure drop of the system are overvalued.
Insufficient air flow
Pressure drop of the system are underestimated.
Cloggings in the air ducts.
Rotation speed too low: verify on the terminal board of the motor that the connection is correct and that the volta-
ge correspond to that of the nameplate.
The rotor turn backwards.
Noise Excessive air flow.
Wear or crack in the pads.
Unbalanced fan.
Foreign bodies in the case.
Strong vibrations Unbalanced impeller because of wear or of dust deposit.
Sliding of the impeller on the case due to deformations.
Cloggings in the air ducts
This symbol indicates that this product must not be disposed of with household waste. Dispose of the unit properly according
to local laws and regulations.
When the unit reaches the end of its useful life, contact the authorities for information on disposal and recycling possibilities;
alternatively, it will be possible to request the free collection of the used equipment from the manufacturer.
Separate collection and recycling of the product at the time of disposal will help and conserve natural resources and ensure
that the unit is recycled in a manner that protects human health and the environment.
The materials that compose this heat recovery units are:
Galvanized plate
Alluminium
Inox
Quartz glass
EPS (expanded polystyrene)
Polyethylene
ABS plastic (acrylonitrile butadiene styrene)
NBR (nitrile butadiene rubber NBR)
SECTION 9 - DISPOSAL
pag. 30
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun KRE-1000DX1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun KRE-1000DX1 in the language / languages: English as an attachment in your email.

The manual is 2.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info