771449
18
Zoom out
Zoom in
Previous page
1/22
Next page
16
WARNING
When any unusual situations arises (burning odour, etc.), stop the unit immediately and turn off the power.
As a result of a certain situation, the unit has caused damage, an electric shock or a re. Please contact the agent.
5.6 Startup Guide
Machine commissioning or rst start-up must be performed by a professional.
Before startup, make sure that the installation and electrical connections are made in accordance with this Manual, and that
no unauthorized personnel is near the machine during operation.
1) Before starting the unit, make sure that:
The device is positioned correctly.
The water system’s ow and piping are correct.
The water pipe is clean.
The air can ow normally.
The condensate water can ow normally to the drain outlet and the elbow.
The heat exchanger is clean.
The electrical connection is correct.
The connecting cable is secure.
The power supply meets requirements.
The motor works normally within the maximum allowable value.
6 SERVICE GUIDE
Ask a professional technician to repair the unit in case it goes wrong.
Make sure the power supply is disconnected during repair.
6.1 Troubleshooting
The warranty does not cover the damage caused by dismantling or cleaning of the internal components by unauthorized agents.
The system maintenance must be carried out by qualied maintenance personnel.
Except as noted above, if the above faults are not typical and the unit still fails, follow the steps below.
Error Measures
If a safety device, such as a fuse, circuit breaker or aleakage
circuit breaker is triggered frequently or the ON/OFF switch is
not working properly.
Turn off the main power switch.
The operating switch is not functioning normally. Turn off the power supply.
If a centralized controller is used, the unit number isdisplayed
on the user interface, and the operating indicator is ickering,
and an error code is shown on thescreen as well.
Notify the installation personnel and report the error
code.
Error Measures
If the system does not run at all. Check whether there is a power failure. Wait forthe
power supply to be restored. If a power failureoccurs
when the unit is still running, the systemwill restart
automatically once the power isrestored.
The system is running but there is insufcient cooling orheating. Check whether the air outlet is blocked by anyobstacles.
Remove the obstacles.
Check whether the lter is blocked.
Check the temperature setting.
Check the fan speed settings on the user interface.
Check whether the doors and windows are open.
Close the doors and windows to shut out windfrom the
external environment.
Check whether there are too many people in the room
when the cooling mode is in operation.
Check whether the heat source of the room is too high.
Check whether there is direct sunlight into theroom. Use
curtains or blinds.
Check whether the angle of air ow is appropriate.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun KFC-S2-2T-250D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun KFC-S2-2T-250D in the language / languages: English as an attachment in your email.

The manual is 1.62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info