772967
14
Zoom out
Zoom in
Previous page
1/14
Next page
ENGLISH
Scan mode
In this mode, the bike computer scans all the time between the different positions. Press the MODE
button until SCAN is displayed. All the functions are activated when the bike starts to move.
Zero setting
Press the MODE button until the required mode is displayed and press the SET/RESET button to clear
the current value. Zero setting cannot be performed in scan mode. The odometer value should not be
deleted as it indicates the total distance travelled.
TROUBLESHOOTING
PROBLEM
CAUSE
ACTION
Nothing displays on the
LCD display.
Battery dead or incorrectly inserted.
Insert the battery with the correct
polarity, or replace the battery.
The current speed is not
displayed.
Incorrect wheel circumference
set.
Too far between the bike
computer and sensor.
The bike computer is fitted at an
incorrect angle.
The distance between the
magnet and sensor too far.
Dead battery in the sensor or
bike computer.
Set the correct wheel
circumference as directed.
Reduce the distance between
the bike computer and sensor.
Adjust the bike computer so
that its underside faces the
sensor.
Move the magnet and sensor.
Replace the battery.
Random output on the
LCD display.
The bike computer is set to scan mode.
If the bike computer is not set to
scan mode, restart it as directed.
The LCD display is dark.
The unit has been exposed to direct
sunlight for some time.
Remove the bike computer from the
holder and place it in a cool, dark
place until the LCD display is
restored. Replace the battery if
necessary.
IMPORTANT:
Interference and malfunctions may occur:
close to another bike with a wireless bike computer.
near a radio, TV, motor or radar.
Do not use the bike computer close to water.
Subject to printing errors and design changes over which we have no control. In the event of problems,
please contact our service department.
www.jula.com
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kayoba-Jula 639-200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kayoba-Jula 639-200 in the language / languages: English, Polish, Swedish, Norwegian as an attachment in your email.

The manual is 1.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info