Manual Kayoba-Jula 005023 (page 66 of 68) (English, Polish, Swedish, Norwegian)

772969

Zoom out

Zoom in

1/68

NOTE:

The settings mode closes automatically if no

settings are made or changed for one minute.

DEFAULT RESET (DEF)

The default setting is dEF-n. Do as follows to

reset to default:

1. Press both the + and “i” buttons for 2

seconds to activate the default function.

2. Now press the + or – button to select

dEF-Y or dEF-N. dEF-N means that

resetting does not take place. dEF-Y

means that resetting takes place.

FIG. 30

3. If dEF-Y is selected, press the “i” button

for 2 seconds to reset the settings to the

default values.

4. dEF-00 is shown on the display after

resetting and the system returns to

normal run mode.

FIG. 31

MAINTENANCE

WARNING!

The battery must not be mounted on the bike

during maintenance or repairs.

• Use a sponge moistened with a mild

detergent when cleaning. Do not use

acidic detergents, they can damage the

bike.

• Avoid leaving the bike unprotected in the

rain or snow.

• If the bike gets wet, wipe it with a towel

after use.

• If the bike is used on a salted surface,

clean it after use with fresh water.

• Do not clean the bike with a high-pressure

washer – risk of water and moisture

penetrating into the electrical

components and motor.

REGULAR MAINTENANCE

Run the following checks at intervals of 1 to 2

months:

– Check that the stem, handlebars and

saddle post are correctly tted and

tightened.

– Check that the axle nuts on the

wheels are correctly tightened.

– Check that the rims are not cracked

and that the spokes are in good

condition and well tensioned.

– Check that the tyres are not worn or

damaged.

– Check that the tyre pressure is

correct.

– Check that the battery contactors on

the frame are clean and free from

oxide.

– Check that the battery is suciently

charged.

– Check that the lights are working

properly.

– Check that the front and back brakes

are working properly.

– Check that the wires are well

lubricated and that the brake pads

are in good condition.

SPOKES

Spoke tension

1. The spokes should be equally tensioned

round the wheel. Check the spoke tension

by squeezing two adjacent spokes on the

same side of the wheel together.

2. Go round the wheel to check if any spokes

are loose.

3. Check that the rims are not warped by

spinning the wheels.

4. Tension loose spokes with a spoke key.

If you are not sure how to do this, take the

bike to an authorised service centre

to tension the spokes.

All manuals and user guides at all-guides.com

all-guides.com

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kayoba-Jula 005023 in the language / languages: English, Polish, Swedish, Norwegian as an attachment in your email.

The manual is 3.29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kayoba-Jula 005023 Manual

Product: