629516
78
Zoom out
Zoom in
Previous page
1/80
Next page
Brief Technical Glossary
78
DiSEqC™
DiSEqC™ (Digital Satellite Equipment Control) is a communication
system between a satellite receiver (master) and the peripheral satellite
components (slaves), such as LNBs, multi-switches, rotating antenna
systems.
It is a single master/multi-slave system, i.e. there is only ever one
master in the satellite system. All activities start from the master.
DiSEqC™ components
If DiSEqC™ switching matrices are cascaded, the master receiver
must transmit the DiSEqC™ signal several times, so that all DiSEqC™
multi-switches in the cascade receive their commands.
These days, DiSEqC™ components (slaves) must be reverse
compatible, i.e. respond to the analogue switching criteria from
receivers that are only equipped with H/V and 22 kHz control signals.
A DiSEqC™ switching matrix will work with analogue switching critiera
until the DiSEqC™ command from the master is received. All analogue
switching criteria are then ignored.
Dolby Digital
A sound transmission method that allows digital surround sound to be
output on a home cinema system.
DVB-MPEG 2
DVB is the abbreviation for Digital Video Broadcasting. DVB-S refers
to the transmission method (S = satellite). MPEG is the abbreviation
for Moving Picture Experts Group, a working group that formulates
internationally applicable standards for the digital compression of
video and audio. MPEG 2 has established itself as the standard for
compression of digital TV signals. MPEG 2 works up to a data rate of
100 MBit/s.
Eb/No ratio
The Eb/No ratio is a measure of the signal to noise ratio of a digital
signal. The value is not identical to the C/N value familiar from analogue
reception technology. At Eb/No values below 5 dB, reception is
normally no longer possible.
FEC
FEC is the abbreviation for Forward Error Correction. The FEC error
rate corresponds to the Viterbi rate.
PID
The PID (Packet Identifi cation) number is an identifi cation number
for video signals and audio signals in the digital data stream of
DVB-MPEG 2 signals. The receiver uses the PID number to create a
unique assignment for the video and audio data transmission. The
PID PCR is the identifi cation number for the synchronisation signal.
The PID PCR is normally identical to the video PID. For programmes
broadcast in multiple languages, the audio PD can be entered manually
to assign a different language to the TV programme. After the PID is
entered, the digital receiver automatically selects the audio data
identifi ed by the PID number from the data stream and assigns it to the
video signal.
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein UFD 170 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein UFD 170 in the language / languages: English as an attachment in your email.

The manual is 5,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info