522382
4
Zoom out
Zoom in
Previous page
1/35
Next page
System Description
The Katadyn PowerSurvivor 40E watermaker system has several components. Refer to the
System Diagram
(Figure A-1) in the Appendix for an overview of the components of the
system and their interconnections.
Motor/Drive/Pump/Membrane Assembly: At the heart of the watermaker system
is a high-pressure, positive-displacement pump. The pump is powered by a reliable 12 (or 24)
VDC electric motor. An oil-bath gearbox (drive assembly) converts the rotary motion of the
electric motor to a powerful, reciprocating, linear motion for driving the pump piston. The pump
pressurizes input seawater to approximately 800 psi (pounds per square inch). The high
pressure forces product freshwater through a semipermeable membrane located in the
membrane housing. All of these main components have been integrated into a single, compact
piece of equipment—with low power consumption, quiet operation and a small footprint.
Prefilter Assembly: The prefilter assembly consists of one prefilter housing and a
standard 30-micron prefilter element constructed of polyester fibers. Two standard elements are
included with each system. In some exceptional circumstances, an optional second prefilter
assembly with a 5-micron prefilter element may be needed (see Kits & Accessories). The
prefilter assembly is separate from the pump, which allows it to be installed in a convenient and
accessible location.
Valves: Two high-quality plastic 3-way valves are supplied. The prefilter 3-way valve selects
between two input sources for the prefilter assembly (and pump):
Clean seawater during normal operation
An alternate intake line for inputting membrane preservative or a cleaning
solution
The product 3-way valve allows easy selection between the two required destinations for the
product freshwater:
A freshwater collection tank for normal operation
A convenient drain location for testing and discarding product freshwater,
membrane preservative and cleaners
Note: If you collect and discard the product freshwater at the same location, manually
directing the output from the product freshwater hose may be the most practical approach. In
this case, the product 3-way valve need not be installed.
Hoses and Hardware: Each PowerSurvivor 40E watermaker is shipped with hardware
sufficient to perform a normal installation. The 3/8" I.D. reinforced plastic hose is used for
seawater intake and reject brine. The smaller, 3/16" I.D. clear plastic hose is for routing product
freshwater. There are also hose clamps and mounting bracket hardware for the prefilter
assembly.
Customer-supplied Equipment: Every installation represents a unique challenge.
You or your installer will have to provide:
a reliable source of clean seawater for input to the prefilter 3-way valve
plumbing to an appropriate drain location for the reject brine water
a plumbing solution for your freshwater collection tank.
Our Promise: Every Katadyn PowerSurvivor 40E watermaker includes a three-year factory
warranty and a long history of outstanding customer support. Our reputation for providing a
quality product along with service when and where you need it is unequaled in the industry. Of
course, you may never need us but, if you do, we’ll be there.
2
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Katadyn PowerSurvivor 40E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Katadyn PowerSurvivor 40E in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Katadyn PowerSurvivor 40E

Katadyn PowerSurvivor 40E User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info