78136
11
Zoom out
Zoom in
Previous page
1/136
Next page
English 11
Î Disconnect the appliance from the water
supply.
Î Detach spray lance from the trigger gun.
Î Briefly switch the appliance on ("I/ON“),
press the trigger gun lever until no further
water is discharged (approx. 1 min).
Î Switch the appliance switch to "0/OFF“.
Î Use the safety catch to secure the trigger
gun lever.
Î Pull out the mains plug.
Î Store the power cord, the HP hose and the
accessories on the appliance.
ƽ Risk of electric shock
Always switch off the appliance and pull out the
mains plug before care and maintenance work.
Prior to longer periods of storage, e.g. in the win-
ter:
Î Remove filter from suction hose for deter-
gent and clean with running water.
Î Pull out filter in water connection using flat-
nose pliers and clean with running water.
The appliance is maintenance-free.
The appliance and its accessories can get de-
stroyed through frost if there are any water resi-
dues in them. To avoid damage to them:
Î Store the appliance and the entire accesso-
ries in a frost-safe room.
Only use original Kärcher spare parts. You will
find a list of spare parts at the end of this docu-
ment.
You can rectify minor faults yourself with the help
of the following overview.
If in doubt, please consult the authorized custom-
er service.
ƽ Risk of electric shock
Always switch off the appliance and pull out the
mains plug before care and maintenance work.
ƽ Warning
Repair works may only be performed by the au-
thorized customer service.
Appliance does not start
Î Check whether the voltage indicated on the
type plate corresponds to the voltage of the
socket.
Î Check the power cable for damage.
Pressure does not build up in the appliance
Î Check the setting at the spray lance.
Î Evacuate air from the appliance: Switch on
the appliance when the HP hose is not con-
nected and allow it to run until the water
which discharges from the HP outlet is free of
bubbles. Then connect the HP hose again.
Î Clean the filter in the water supply connec-
tion: This can be easily removed using flat-
nose pliers.
Î Check all supply lines to the HP pump for
leaks or blockages.
Strong pressure fluctuations
Î Clean the high-pressure nozzle: Remove dirt
and debris from the nozzle bore with a nee-
dle and rinse through with water towards the
front.
Î Check the volume of incoming water.
HP pump leaking
Î Slight leakage from the HP pump is normal.
If the leakage increases contact the author-
ized customer service.
No detergent infeed
Î Select the low-pressure setting for the spray
lance.
Î Clean the filter of the detergent suction hose.
Î Check the DT suction hose for kinks.
Special accessories expand the possibilities of
using your appliance. Please contact your Kärch-
er dealer for further information.
Maintenance and care
Cleaning
Maintenance
Frost protection
Spare Parts
Troubleshooting
Special accessories
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher K 2.91 MD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher K 2.91 MD in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info