733570
14
Zoom out
Zoom in
Previous page
1/16
Next page
14 | EN
shown and pull the unit with reverse direction from the installation.
Note:
The under cabinet installation shall only be carried out by a qualied expert.
Basic Functions
Switching the Unit On & Off
1. Power the unit as described above.
2. The unit is now in standby mode.
3. To switch the unit on, press the Radio ON/OFF button (1) once.
4. To switch the unit off into standby mode, press the Radio ON/OFF button (1) again.
Volume Control
To increase the volume, press the VOL+ button (5).
To decrease the volume, press the VOL- button (6).
Clock Setting
The clock must be set while in standby mode.
1. When the unit is powered on for the rst time “0:00” will be ashing in the display, indicat-
ing that the unit is already in clock setting mode. Proceed to step 3.
2. If the clock has been set before and you would like to adjust it, press and hold for 2
seconds the SET button (2).
3. While the time is ashing, press the Hour button (8) to adjust the hours and the Minute
button (7) to adjust the minutes.
4. Once you have set the current time, press the SET button (2) to conrm your settings
and exit the clock setting mode.
Alarm Setting
This unit enables you to set 2 different and independent alarm times. You can select to wake to
buzzer or radio. The alarms must be set while in standby mode (radio off).
1. To set alarm 1 [or alarm 2] press the AL-1 button (5) [or AL-2 button (6)] while the unit is
in standby mode. The alarm time will be ashing.
2. While the time is ashing, press the Hour button (8) to adjust the hours and the Minute
button (7) to adjust the minutes of the desired alarm time.
3. When the time is set, press the AL-1 button (5) [or AL-2 button (6)] again repeatedly to
select between the following modes (indicated by a dot in the display):
Wake to buzzer
-> Wake to radio -> Alarm off
4. Release all buttons for 3 seconds to conrm your settings.
5. When you have selected “Wake to buzzer”, the buzzer will sound at the set time.
When you have selected “Wake to radio”, the last frequency set will be played at the last
volume selected at the set time.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio RA2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio RA2022 in the language / languages: English, German as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info