652954

Karcher Audio NO-030 FRANKIE Manual

22
Zoom out
Zoom in
Previous page
1/24
Next page
22 | EN
Note:
• The programming mode will automatically quit in case there is no button pressed within about 6
seconds after pressing the MEM/CLK-ADJ button.
MP3 Playback from USB or SD
1. Insert or take out a USB stick or SD card only while the unit is in standby mode.
2. After inserting a USB stick or SD card, turn the unit on by pressing the ON/
STANDBY I/ button.
3. Select the USB or SD CARD mode by repeatedly pressing the FUNCTION but-
ton until “USB” or “SD CARD” appears in the display.
4. The USB stick or SD card is now being read. The display will then show the
total no. of folders and tracks and playback will start automatically.
5. Playback functions are the same as for CD playback as described above.
6. To stop playback, press the STOP ■ button.
Notes:
• A USB device must always be connected directly to the USB port of this product. The use of a
USB extension cord is not supported by this product. The USB port of this product cannot com-
municate with a computer directly.
• The reading time for a USB drive or SD card varies depending on the speed of the memory
device and the number of songs and folders.
• Always switch off the unit before removing a USB drive or SD card to prevent damage to your
USB device or memory card. The manufacturer is not responsible for the loss or damage of data.
• This unit does not support USB MP3 players due to their inherent lack of software compatibility.
Only USB “pen drives” (ash memory USB drives) can be used for MP3 playback.
• Only MP3 les can be played. Due to numerous methods of compression it may be that some
les or USB drives or SD cards cannot be played.
Supported les: Bit rate 32kbps - 320kbps; sampling rate 32kHz, 44.1kHz and 48kHz decodable.
AUX Input
You can connect the audio output of an external device such as an MP3 player to this unit to listen to
the sound of that device through the amplier of this music system.
1. To connect the external device please use a standard stereo audio cable (3.5 mm to 3.5 mm
plugs) (not included) to connect the headphone out or audio line out of the external device to the
AUX input socket of this unit.
2. Switch the unit on and select the AUX mode “AUX” by pressing the FUNCTION button repeat-
edly.
3. Switch the external device (e.g. MP3 player) on.
4. Start playback of the external device and adjust the volume control of the main unit to the desired
level.
5. Remember to switch off the unit when you are nished using the external device.
Line Out
You can connect this unit to an external hi- system by connecting the line out socket to the related
input socket of your external hi- system via RCA cable (not included).
… 22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio NO-030 FRANKIE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio NO-030 FRANKIE in the language / languages: English, German as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info