487698

Kalorik TKG.HDM1000 Manual

7
Zoom out
Zoom in
Previous page
1/8
Next page
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Bimar
(Italy). The pages must be reproduced and folded in
order to obtain a booklet A5 (+/- 148.5 mm width x 210
mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t
change the page numbering. Keep the language
integrity.
7/8
Assembly page 7/8
Fax +32 030 9904733
INSTALLATION
After removing the packing materials, check the integrity of the appliance; if you are unsure, do
not use it and ask for qualified professional help. The packing materials (plastic bags,
polystyrene foam, nails, etc.) must be kept out of the reach of children because they are potential
sources of danger; dispose of them according to current regulations, in dedicated containers for
differentiated collection.
Before connecting the appliance, check that the voltage shown on the data plate matches that of
your power supply and that the electric plug is grounded. In the event of incompatibility between
the electric outlet and the plug of the appliance, have the outlet replaced with another more
suitable type by professionally qualified personnel, who will make sure that the section of the
wires of the outlet is appropriate for the absorbed power of the appliance. In general, the use of
adapters or extension cords is not recommended; if their use is indispensable, they must conform
to existing safety standards and their current capacity (amperes) must not be less than the
maximum of the appliance.
The power socket must be easy to reach so the plug can be removed quickly in case of
emergency.
Each time before use, check that the appliance is in good condition and that the electric cord is
not damaged: if in doubt, ask for professionally qualified help.
Make sure that the cable is correctly positioned, that it is not touching hot elements or sharp
edges, is not wound around the utensil, is not twisted up on itself or in the way, so the appliance
cannot tip over.
Place the appliance:
- far from other sources of heat (for example other ovens, gas hobs, etc.), inflammable materials
(wallpaper, etc.), explosive materials (spray cans) and materials that would become deformed
when heated.
- on a flat and stable working top and not on delicate surfaces (painted furniture, tablecloths, etc.),
in a position where it cannot be bumped, and at a suitable distance from the edge so that it cannot
fall.
- far from containers of liquids, such as sinks, etc. Should it unexpectedly become wet or fall in a
liquid, remove the plug immediately from the socket, leave the appliance to cool, dry carefully
and make sure the electric parts are not wet; if in doubt, call qualified professional help.
The appliance must be sufficiently ventilated with free space of at least 25 cm above, 10 cm
behind and 15 cm at the sides.
The appliance must not be positioned immediately under a socket.
Do not use the appliance with a timer or a programmer or with a system that can switch on the
appliance automatically, to avoid risk of fire, since a fire risk exists if the heater is covered or
positioned incorrectly.
In the case of a breakdown or fault, switch off the appliance and have it checked by a
professionally qualified technician; repairs made by unqualified persons can be dangerous and
render void the warranty.
OPERATION
When using for the first time
Before being used for cooking, the appliance should be switched on “empty” to eliminate the “smell
of new” and any oils remaining from the production process. Insert the plug in the power socket, turn
the timer knob to position “20”, position the selector knob “I” and leave the appliance on. When the
cycle ends, remove the plug from the socket and wait until the appliance is cool; for the cleaning of
accessories (heating rod, bread warmer and oil tray), use a slightly moist soft cloth; do not use metal
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalorik TKG.HDM1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalorik TKG.HDM1000 in the language / languages: English, Italian as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info