491056

Kalorik KA CH 3 Manual

6
Zoom out
Zoom in
Previous page
1/16
Next page
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t change
the page numbering. Keep the language integrity.
6 KA CH 3 - 060622
Assembly page 6/16
Fax +32 2 359 95 50
CLEANING AND MAINTENANCE
Warning: The unit must be unplugged from the power supply prior to any maintenance or
cleaning in order to reduce the risk electric shock or fire.
A. Light bulb replacement procedure
Most light bulbs are rated to last approximately 3000 hours. Like all light bulbs, bulbs require
periodic replacement. When the bulbs in your unit have burned out you will notice one or
more of the following:
Contrasting light is dark
The flame is dim or dark in certain areas
The log set ember bed appears dim or dark in certain areas
Your unit must be opened in order to replace the light bulbs. To reduce the number of times
you need to open the unit, replace all the lights bulbs at the same time if they are close to the
end of their rated life.
Warnings:
The light bulbs in your unit can become extremely hot. Allow at least 10 minutes between
turning off the unit and removing the light bulbs to avoid the accidental burning of the
skin.
Always make sure to replace the bulbs by a bulb with exactly the same features.
Replacing the flame generation bulbs: first open the side panels by simply pulling at them (fig.
2) Unscrew the four screws that are fixing the top panel (2 at each side) (fig. 3) and remove the
top panel. Locate the flame generation cylindrical drum (fig. 4), remove the round pieces of
the drum cylinder by slightly squeezing the cover of the cylinder (fig. 5). You will see two light
bulbs, pull out the old ones and replace them by new ones. After having replaced the bulbs,
make sure to reassemble the cylinder correctly. Close reattach the top panel and close the
side panels.
Replacing the top contrasting light bulbs and the log set ember bed light bulbs: first remove the
front glass door by releasing the screws situated at the right and left side of the glass door (fig.
6). You now have access to the top bulbs (fig. 7) in order to replace them. Pull forward and lift
up the log set ember bed to remove it (fig. 8). Replace the light bulb of the log set ember bed
(fig.9). Once this is done, put the log set ember bed back in its initial position and close the
glass door.
B. General cleaning instructions
The housing may be wiped with a slightly damp, lint-fee cloth; do not use any abrasive
scouring pad or steel wool.
Do not use detergents or cleaning products.
If necessary, dust particles accumulated in the air outlet openings may be removed with a
vacuum cleaner.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalorik KA CH 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalorik KA CH 3 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info