29172
35
Zoom out
Zoom in
Previous page
1/39
Next page
13
General
informations
English
General informations
COMPU LINK remote control system
The COMPU LINK Remote Control System controls relative operations between components automatically and
facilitates various operations.
This is a system originated and developed by JVC for facilitating various system operations.
The following is a brief explanation of this system:
Automatic source selection
When the supplied COMPU LINK cord is utilized to connect this unit to others equipped with COMPU LINK jacks,
switching-in of each system component can be performed with a single touch on the source selector button located on a
JVC amplifier or receiver.
When selection is carried out in this manner, the corresponding unit will automatically start operation.
Upon pressing of the play button, the source selector of the amplifier or receiver changes automatically. When a new
unit is switched in, the previously selected component stops operation within five seconds.
Synchronized recording
Synchronized recording refers to the process in which a JVC cassette deck starts recording, synchronized with this unit.
Synchronized recording is carried out as follows:
1
Set the cassette deck to the recording pause mode in accordance with its instructions.
2
To record only certain tracks or discs, program the tracks in any order, as desired.
3
Press the 3 PLAY button on the front panel of this unit. The cassette deck automatically starts recording, synchronized
with this unit.
Automatic power on/off function
This function is to control the power on/off of the receiver/amplifier or this unit respectively as the following.
When this unit enters playback mode, the power of the receiver or amplifier is turned on.
When the source selector of the receiver/amplifier is set to CD function mode, the power of this unit is turned on.
NOTES
Synchronized recording stops automatically when this unit stops playback.
To cancel synchronized recording, press the stop button of this unit or the cassette deck.
To properly operate the synchronized recording, the buttons/controls other than %
%%
% STANDBY/ON, 7
77
7 STOP and 0 OPEN/
CLOSE buttons do not function.
If the recording pause mode is set on the cassette deck by pressing the 8
88
8 PAUSE button after pressing the
REC and 3
33
3 PLAY
buttons simultaneously, synchronized recording is not possible. For details, refer to the instructions for the cassette deck.
NOTES
Abnormal operation may result if the power supply of the component(s) is interrupted. If this happens, you must start over
again.
Ensure that the COMPU LINK jacks of the each component are connected with the supplied COMPU LINK cord. Also, be sure to
fully read the instructions for each component.
When the power of the amplifier or receiver is switched off, this unit is also turned off automatically.
;/)=%.&B(QJERRN3DJH7KXUVGD\-DQXDU\30
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC XLFZ700BK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC XLFZ700BK in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info