167173
2
Zoom out
Zoom in
Previous page
1/20
Next page
2
Lees voor een
ENGLISH
Thank you for purchasing a JVC product.
Please read all instructions carefully before
operation, to ensure your complete
understanding and to obtain the best possible
performance from the unit.
CAUTIONS AND NOTES
This unit is designed to operate on 12 V
DC, NEGATIVE ground electrical
systems.
This unit uses BTL (Balanced Trans-
formerless) amplifier circuitry, i.e.,
floating ground system, so please
comply with the following:
Be sure not to connect the “–”
terminals of the speakers to a common
point.
Do not connect them to each other.
Do not connect them to the metal body
or chassis.
Cover the unused terminals with
insulating tape to prevent them from
short circuiting.
When an extension lead is used, it
should be as thick and short as possible;
connect it firmly with insulating tape.
Be sure to leave an appropriate space
between the antenna (aerial) and the
wires of this unit.
When replacing the fuse, only use
a 20 A fuse.
Do not let pebbles, sand or metallic
objects get inside the unit.
The heat sink becomes very hot while
in use (and also after use). Be careful
not to touch it.
To keep the heat dissipation mechanism
running effectively, wipe the accumu-
lated dust off periodically.
Playing the tape, radio, CD or MD, etc.
loudly for a long period of time will
exhaust the battery, while the engine is
turned off or while the engine is idling.
DO NOT disassemble the units since
there are no user serviceable parts
inside.
FRANÇAIS
Merci pour avoir acheté un produit JVC.
Veuillez lire attentivement toutes les
instructions avant d’utiliser l’appareil afin de
bien comprendre son fonctionnement et
d’obtenir les meilleures performances
possibles.
ATTENTION ET REMARQUES
Cet appareil est conçu pour fonctionner
sur des sources de courant continu de
12 V à masse NEGATIVE.
Cet appareil utilise un circuit
d’amplification BTL (symétrique sans
transformateur), c’est à dire un système
à masse flottante par conséquent
veuillez vous conformer à ce qui suit:
Ne pas raccorder les bornes “–” des
haut-parleur à un point commun.
Ne pas les raccorder l’un à l’autre.
Ne pas les raccorder au corps
métallique ou au châssis.
Recouvrir les bornes inutilisées avec du
ruban isolant pour éviter de les court-
circuiter.
Si vous utilisez un fil de prolongement,
celui-ci doit être aussi épais et aussi
court que possible. Connectez-le
solidement avec un ruban adhésif.
• Bien laisser un espace suffisant entre
I’antenne et les fils de cet appareil.
Lors du remplacement du fusible, utili-
sez uniquement un fusible de 20 A.
Ne pas laisser pénétrer de cailloux, de
sable ou d’objets métalliques dans
I’appareil.
Le déperditeur de chaleur devient brûlant
pendant l’utilisation (et également après
utilisation). Evitez soigneusement de le
toucher.
Pour que le mécanisme de dissipation
de la chaleur fonctionne effectivement,
essuyer régulièrement la poussière qui
s’accumule.
Si vous écoutez une cassette, radio, un
CD ou un MD, etc., avec un volume très
fort pendant une longue période, alors
que le moteur est arrêté ou tourne au
ralenti, la batterie finit par se décharger.
NE DEMONTEZ PAS l’appareil. Il n’y a
aucune pièce réparable par l’utilisateur
à l’ntérieur.
DEUTSCH
Wir danken Ihnen für den Kauf eines JVC
Produkts. Bitte lesen Sie die Anleitung
vollständig durch, bevor Sie das Gerät in
Betrieb nehmen, um sicherzustellen, daß Sie
alles vollständig verstehen und die
bestmögliche Leistung des Geräts erhalten.
VORSICHTMASSNAHMEN
UND HINWEISE
Dieses Gerät ist nur für einen Betrieb in
elektrischen Anlagen mit 12 V Gleich-
strom und (–) Erdung ausgelegt.
Der Verstärkerteil dieses Geräts arbeitet
mit einer BTL-Schaltung (symmetrische
Gegentakt-Ausgangsschaltung ohne
Anpaßtransformator). Daher unbedingt
auf die folgenden Punkte achten:
Die Minus-Lautsprecheranschlüsse
“–” niemals am gleichen Kontakt
anschließen.
Diese Kabel niemals miteinander
verbinden.
Diese Kabel niemals an Metallteile
(Karosserie, Chassis) anschließen.
Die nicht verwendeten Anschlußklem-
men mit Isolierband überkleben, um
Kurzschlüsse zu verhindern.
Wenn ein Verlängerungskabel benutzt
wird, eine dicke Ausführung und die
kürzestmögliche Länge verwenden. Die
Verbindung sorgfältig mit Isolierband
umwickeln.
Vergewissern Sie sich, daß ausreichen-
der Abstand zwischen der Antenne und
den Kabeln des Geräts vorhanden ist.
Verwenden Sie beim Sicherungswechsel
nur eine 20-A-Sicherung.
Darauf achten, daß keine Fremdkörper
wie Sand oder Metallgegenstände in
das Geräteinnere gelangen.
Der Kühlkörper ist während des Betriebs
(und auch noch danach) sehr heiß.
Berühren Sie ihn auf keinen Fall.
Um das Wärmeableitungssystem in
einem guten Betriebszustand zu halten,
regelmäßig den Staub abwischen.
Wenn Sie eine Cassette, CD oder MD
usw. über längere Zeit mit hoher Laut-
stärke wiedergeben, während der Motor
ausgeschaltet ist oder sich im Leerlauf
befindet, entlädt sich die Batterie.
Die Anlage darf NICHT geöffnet
werden, da sich keine Teile im
Anlageninnern befinden, die vom
Benutzer gewartet werden müßten.
KS-AX4700_4500[J.E]_f 01.3.22, 10:27 AM2
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC ks ax4500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC ks ax4500 in the language / languages: English, German, Dutch, French, Swedish, Spanish as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info