39772
70
Zoom out
Zoom in
Previous page
1/88
Next page
70 EN
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
1.
No power is supplied.
2.
“SET DATE/TIME!”
appears.
3.
Recording cannot be
performed.
4.
There is no playback
picture.
5.
Some functions are not
available using the MENU
button.
6.
Some functions are not
available using the Select
Dial.
7.
The focus does not adjust
automatically.
8.
The cassette won’t load
properly.
9.
Play, Rewind and
Fast-Forward functions
don’t work.
1.
The power is not connected
properly.
The battery is dead.
The LCD monitor is not
open fully or the viewfinder
is not pulled out when
recording.
2.
The built-in rechargeable
clock lithum battery is
discharged and the
previously set date/time is
erased.
3.
The tape’s record safety tab
is set to “SAVE”.
The Power Dial is set to
“PLAY”.
“TAPE END” appears.
The cassette's cover is open.
4.
•The camcorder is not getting
power, or some other
malfunction exists.
5.
•The Power Dial is set to
A
”.
6.
•The Power Dial is set to
A
”, “5S” and “ ”.
7.
Focus is set to “MANUAL”.
•The recording was done in a
dark place, or the contrast
was low.
•The lens is dirty or covered
with condensation.
8.
The cassette is in the wrong
position.
The battery’s charge is low.
9.
The Power Dial is not set to
“PLAY”.
1.
Connect the AC Adapter
securely (Z pg. 10).
Replace the dead battery
with a fully charged one
(Z pg. 9).
Open the LCD monitor
fully or pull out the
viewfinder. The LCD
monitor turns on/off when
it is opened/closed at
approx. 90° while the
Power Dial is set to any
position except “OFF” if the
viewfinder is not fully
pulled out.
2.
Connect the camcorder to
an AC outlet using the AC
Power Adapter/Charger etc.
for over 24 hours to charge
the clock lithum battery
(Z pg. 11).
3.
Set the tape’s record safety
tab to “REC” (Z pg. 12).
Set the Power Dial to “
A
”,
M
”, “5S” or “
(Z pg. 17).
Replace with new cassette
(Z pg. 12).
Close the cassette's cover.
4.
Turn the camcorder’s power
off and on again (Z pg. 19).
5.
Set the Power Dial to any
position except “
A
(Z pg. 17).
6.
Set the Power Dial to any
position except “
A
”, “5S”
and “ ” (Z pg. 17).
7.
Set Focus to “AUTO
(Z pg. 45).
Clean the lens and check
the focus again (Z pg. 75).
8.
Set it in the right position
(Z pg. 12).
Install a fully charged
battery (Z pg. 8).
9.
Set the Power Dial to
“PLAY” (Z pg. 50).
If, after following the steps in the chart below, the problem still exists, please consult your nearest JVC
dealer.
TROUBLESHOOTING
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC GR-DVL9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC GR-DVL9000 in the language / languages: English as an attachment in your email.

The manual is 4,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC GR-DVL9000

JVC GR-DVL9000 User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info