656276
10
Zoom out
Zoom in
Previous page
1/14
Next page
Page:10/14
5.Fan Press this key to set low/middle/high fan speed.
6.Swing Press this key to control swing function.
7.Temperature Press this key to choose Centigrade or Fahrenheit.
8.Sleeping Only under cooling functionPress this key to enable this function.
9.Timer Press this key to set time. Within 5 hours, time interval is half hour; from 5
hours to 24 hours, time interval is 1 hour. Once set number will flash 5 times as
confirmation .
10.Max cool Under cooling mode, press this key to achieve maximum output.
11.Kepad lockOnce set, press this key in use of something like a pin to lock all the button,
as the screen will show image: , press this key again to unlock(This function can
prevent kid from playing with the unit) .
12. Reset: Press this key by using something like a pin to reset remote control, default
setting is cooling mode and high speed fan, auto swing.
3
Multi protective function
3.1 Anti-freezing protecting control:
When the ambient temperature is very low under Cooling Mode, the compressor and
water motor will stop working if the copper coil temperature Tp <2 for over 20 seconds
after the compressor continues working for 10 minutes, the LCD Display E4; when copper
coil temperature will increase>8, the protection will be stopped automatically, and
recover to previous mode on the condition that compressor three-minutes delay protection
satisfied.
3.2Water-full protection:
When the water level in the bottom water plate is surpassing warning level, the unit will
alert automatically and “P2” will flashes on LCD. Please discharge water in the machine
according to Chapter “Water Drainage”
3.3 Compressor delay-protection
Except for the first power-on, the compressor can start at once. In other cases, the
compressor runs under 3 minutes delay protection.
3.4 No refrigerant protection
Under cooling, dehumidifying, heating mode, after compressor works for over 10
minutes, if the temperature difference of coil temperature and room temperature is less
than 3 for more than 30 minutes, the machine will enter no-refrigerant protection. That
is to say, there is no refrigerant in the unit, compressor and water spring motor stop
working, up fan runs with low speed, down fan stops running, E3 appears on LCD.
3.5 Press any key on the control panel , background light will turn bright from dark for 10
seconds.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Just Fire AIRCO 12000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Just Fire AIRCO 12000 in the language / languages: English as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info