18
CLEANER FOR CAPPUCCINO
PRESS
KEY
Ⅲ Place a sufficiently large receptacle under the height-adjustable
dual spout (Fig. 6).
Ⅲ Fill a receptacle with approx. 4 dl of water and add 1 1/2 capfuls of
JURA cappuccino cleaning agent. Dip the two milk hoses into the
solution (Fig. 8/B).
Ⅲ Press the Clean Dual Spout key (Fig. 5/J).
MACHINE CLEANING
Ⅲ You will hear an acoustic signal.
ADD TABLET
PRESS
KEY
Ⅲ Drop an original JURA cleaning tablet into the filler funnel (Fig. 16).
Ⅲ Press the Clean Dual Spout key (Fig. 5/J).
MACHINE CLEANING
Ⅲ You will hear an acoustic signal.
WATER FOR CAPPUCCINO
PRESS
KEY
Fill a receptacle with approx. 0.4 litres of fresh water and dip
the milk hoses into it (Fig. 8).
Ⅲ Press the Clean Dual Spout key (Fig. 5/J).
MACHINE CLEANING
Ⅲ You will hear an acoustic signal.
EMPTY
TRAY
EMPTY
COFFEE
BIN
Ⅲ Remove the tray and the grounds bin and EMPTY the coffee
grounds.
COFFEE BIN
MISSING
Ⅲ Place the grounds bin and the tray back into the machine.
COFFEE READY
If you accidentally pressed the Combi-Cleaning button (Fig. 5/J),
you can terminate the process after it has begun.
Ⅲ Press the ‘+’ or ‘–’ button until the following appears in the display:
CLEAN COMBI
START
NO
Ⅲ To ensure that combi-cleaning is not carried out, press the P
button.
COFFEE READY
16.13 Changing the filter
After 50 litres of water, the CLARIS plus filter cartridge will need
to be replaced. If the capacity exceeds 5%, a message on the
display will prompt you to change the filter. If it exceeds 10%,
the display will read CHANGE NOW
COFFEE READY
CHANGE
FILTER
Ⅲ Open the programming door (Fig. 4) and press the Filter key (Fig.
5/B).
CHANGE FILTER
START
YES
Ⅲ To change the filter, press the P button or the Filter button
(Fig. 5/B):
INSERT FILTER
PRESS
WATER
Ⅲ EMPTY the water tank and insert the filter cartridge in the tank
together with the cartridge holder, applying gentle pressure. Push
the cartridge holder into position until it engages audibly (Fig. 17).
Ⅲ Fill the water tank with cold, fresh tap water and reinstall it in the
machine.
Ⅲ Place a sufficiently large receptacle under the pivoting hot water
spout (U).
Ⅲ Press the Hot Water key (T / ).
FILTER RINSE
Ⅲ The flow of water stops automatically.
COFFEE READY
The water might be slightly discoloured (no hazard to health).
If you accidentally pressed the Filter button (Fig. 5/B), you can
terminate the process after it has begun.
Ⅲ Press the ‘+’ or ‘–’ button until the following appears in the display:
CHANGE FILTER
START
NO
Ⅲ To ensure that the filter change program is not carried out, press
the P button.
COFFEE READY
16.14 Decalcifying
Once started, the decalcifying program must not be interrupted. It
takes approx. 40 minutes.
If you are using a CLARIS filter cartridge, you must always re-
move it before decalcifying.
You can only decalcify the machine if it is not in filter mode or if
a service technician has performed the corresponding configu-
ration.
It is possible that any descaling during programming of the
CLARIS plus filter cartridge can only be started by the JURA
service technician.
DURATION
APPROX 2’
