468234
13
Zoom out
Zoom in
Previous page
1/17
Next page
13
Switch on machine by pressing button.
Push button for about 3 seconds. Warning lamps ,
(if necessary) , light up.
Fill water tank.
Empty drip tray and grounds container and replace them. War-
ning lamps (if necessary) go out.
Place a container under the coffee-spout (9).
Put a Jura cleaning tablet (Fig. 9) into the powder funnel (10).
Press selector button . The warning lamp goes out.
Warning lamp flashes.
The flashing of warning lamp indicates that the cleaning
process is activated.
If warning lamp lights up, empty drip tray (if necessary),
wait about 10 seconds before replacing it. Warning lamp
goes out.
Replace the container under the coffee-spout (9) and press button
.
The cleaning process is continued.
If warning lamp lights up again, empty drip tray (if neces-
sary), wait about 10 seconds before replacing it. Warning lamp
goes out.
Replace the container under the coffee-spout (9) and press button
.
The cleaning process is continued. At the end of it, warning lamp
lights up.
Empty drip tray and grounds container and replace them.
Warning lamp lights up.
Replace container under the coffee spout (9) and press button
. The machine rinses and warning lamp lights up.
Tip: Clean powder funnel with a bottle-brush.
13. Decalcifying
Your machine has an integrated decalcifying program. If a Claris fil-
ter cartridge is used there is no need for decalcifying your machine.
Please use Jura decalcifying tablets only. These are available from
your Jura dealer
Note: If the machine needs decalcifying warning lamp
lights up. You can still draw off coffee and hot-water/steam
and run the decalcifying program later.
Important: Run the decalcifying program only after the ma-
chine has been switched off for at least 2 hours and has
cooled down completely. The decalcifying program is started
with the machine switched off. The running decalcifying
program must not be interrupted.
Switch off machine by pressing button and let the machine
cool down for 2 hours.
Then remove water tank.
Press button for about 3 seconds. Warning lamps , ,
light up.
Pour 0,5 litres of water into a container and completely dissolve
the contents of a blister pack (2 tablets). Then fill the mixture in-
to the water tank.
Empty drip tray and replace it. Warning lamps , , ,
flash and warning lamp lights up.
Place a sufficiently big container under the pivoting nozzle (13).
Turn selector switch for hot-water/steam (12) to position .
E
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jura IMPRESSA E5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jura IMPRESSA E5 in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jura IMPRESSA E5

Jura IMPRESSA E5 User Manual - German - 17 pages

Jura IMPRESSA E5 User Manual - Dutch - 17 pages

Jura IMPRESSA E5 User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info