697702
40
Zoom out
Zoom in
Previous page
1/52
Next page
Inspektion und Wartung
CerapurModul-Smart – 6 720 804 627 (2012/08)
40
13.1.6 Membran (Abgasrückströmsicherung) in der
Mischeinrichtung prüfen
B Mischeinrichtung nach Bild 59 ausbauen.
B Membran auf Verschmutzung und Risse prüfen.
Bild 68
B Mischeinrichtung wieder montieren.
13.1.7 Ausdehnungsgefäß prüfen (siehe auch Seite 15)
Das Prüfen des Ausdehnungsgefäßes ist nach DIN 4807, Teil 2,
Abschnitt 3.5 jährlich erforderlich.
B Gerät drucklos machen.
B Ggf. Vordruck des Ausdehnungsgefäßes auf die statische Höhe der
Heizungsanlage bringen.
13.1.8 Betriebsdruck der Heizungsanlage einstellen
B Wenn der Zeiger unterhalb von 1 bar steht (bei kalter Anlage): Wasser
nachfüllen, bis der Zeiger wieder zwischen 1 bar und 2 bar steht.
B Wenn der Druck nicht gehalten wird: Ausdehnungsgefäß und Hei-
zungsanlage auf Dichtheit prüfen.
13.1.9 Schutzanode prüfen
Die Magnesium-Anode stellt für mögliche Fehlstellen in der Emaillierung
nach DIN 4753 einen Mindestschutz dar.
Eine Vernachlässigung der Schutzanode kann zu frühzeitigen Korrosi-
onsschäden führen
B Kabel von der Anode zum Speicher entfernen.
B Strom-Messgerät (mA) in Reihe dazwischen schalten.
Der Stromfluss darf bei gefülltem Speicher nicht unter 0,3 mA liegen.
Bild 69
B Bei zu geringem Stromfluss: Schutzanode tauschen.
13.1.10Sicherheitsventil des Speichers prüfen
B Sicherheitsventil prüfen und durch mehrmaliges Anlüften spülen.
13.1.11Elektrische Verdrahtung prüfen
B Elektrische Verdrahtung auf mechanische Beschädigungen prüfen
und defekte Kabel ersetzen.
HINWEIS: Geräteschaden!
Beim Nachfüllen von Heizwasser können Spannungsris-
se am heißen Wärmeblock auftreten.
B Heizwasser nur bei kaltem Gerät nachfüllen.
Anzeige am Manometer
1 bar Minimaler Fülldruck (bei kalter Anlage)
1 - 2 bar Optimaler Fülldruck
3 bar Maximaler Fülldruck bei höchster Temperatur des
Heizwassers darf nicht überschritten werden
(Sicherheitsventil öffnet).
Tab. 19
6 720 615 492-18.2O
Nach der Messung/dem Tausch:
B Kabel wieder aufstecken, da die Anode sonst außer
Funktion ist.
1.
mA
2.
3.
3.
6 720 615 492-19.1R
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Junkers CerapurModul-Smart at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Junkers CerapurModul-Smart in the language / languages: German as an attachment in your email.

The manual is 4,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Junkers CerapurModul-Smart

Junkers CerapurModul-Smart User Manual - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info