563272
5
Zoom out
Zoom in
Previous page
1/7
Next page
i Op de stuuringang A1 van de REG-automaat mag de stroombelasting niet hoger worden
dan 40 mA. Om de stroombelasting te bepalen, het stroomverbruik van alle aangesloten
impulseenheden en verlichtingselementen van de installatiedrukknop optellen.
Voorbeeld:
6 x impulseenheid: 6 x 2,5 mA = 15 mA
Beschikbare stroom voor verlichtingselementen: 40 mA - 15 mA = 25 mA
Aantal verlichtingselementen bij 0,9 mA per element: 25 mA / 0,9 mA = 27,7
Daarmee kunnen 27 verlichte installatiedrukknoppen worden aangesloten. Het aantal niet
verlichte installatiedrukknoppen is niet begrensd.
o REG-automaat op montagerail monteren.
o REG-automaat, impulseenheid (9) en installatiedrukknop conform aansluitschema (afbeel-
ding 3) of (afbeelding 4) aansluiten.
o Impulseenheid in een apparatuurdoos monteren, aansluitklemmen moeten onder liggen.
o Installatiedrukknop in een apparatuurdoos monteren.
o Frame en element monteren.
o Wanneer meerdere installatieautomaten gevaarlijke spanningen aan het apparaat of de
last leveren, de installatieautomaten koppelen of met een waarschuwing zodanig belette-
ren, dat vrijschakelen is gewaarborgd.
5.2 Inbedrijfname
REG-automaat instellen
o Bedieningsmodus op de REG-automaat instellen (zie bediening).
o Uitschakelvertraging op de REG-automaat instellen (zie bediening).
o Netspanning inschakelen.
Bewegingsmeldereenheid instellen
GEVAAR!
Elektrische schok bij aanraken van onderdelen die onder spanning staan.
Elektrische schokken kunnen dodelijk letsel tot gevolg hebben.
Voorafgaand aan werkzaamheden aan het apparaat alle bijbehorende installa-
tieautomaten vrijschakelen. Spanningvoerende delen in de omgeving afdekken!
i Voor een functietest met bewegingsmeldereenheid, deze instellen op schakelen onafhan-
kelijk van de helderheid (zie handleiding van de eenheid).
o Functietest uitvoeren.
o Indien nodig de gevoeligheid op de bewegingsmeldereenheid instellen (zie handleiding van
de eenheid).
o Helderheidswaarde op de bewegingsmeldereenheid instellen (zie handleiding van de een-
heid).
o Bij bewegingsmeldereenheden, die over kortbedrijf beschikken, het kortbedrijf instellen (zie
handleiding van de eenheid).
6 Bijlage
6.1 Technische gegevens
Trappenhuisautomaat, Art.-Nr.: 1208 REG
Nominale spanning AC 230 V ~
Netfrequentie 50 Hz
Opgenomen vermogen ca. 1 W
Omgevingstemperatuur +5 ... +45 °C
Uitschakelvertraging ca. 10 s ... 15 min
Tolerantie ± 20 %
Stuuringang A1
Stroombelastbaarheid 40 mA
5/7
32549223
J:0082549223
27.04.2012
Lichtmanagement
Trappenhuisautomaat, Impulsgever
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jung 1208 UI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jung 1208 UI in the language / languages: Dutch as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info