614742
71
Zoom out
Zoom in
Previous page
1/72
Next page
Verhelpen van storingen
Als er zich problemen voordoen tijdens het naaien, kijk dan of u de instrucies van deze handleiding correct uitvoert.
Als uw probleem blijft bestaan, kan onderstaande tabel u helpen met uw probleem.
Specificaties
PROBLEEM OORZAAK OPLOSSING BLZ.
Geen stoftransport.
*De machine draait loos.
*Steeklengte staat in de linker positie
van de handmatige modus.
*De transporteur is verzonken.
*Doe de garenwinder naar links.
*Zet de steeklengte in automodus of
doe de regelaar naar links.
*Doe de verzinkknop naar links
15-17
27,28
14
Naald breekt.
*De naald is krom of niet juist bevestigd.
*De naaivoet is niet geschikt voor uw steek,
*De relatie naald, garen en stof is niet juist.
*Plaats een nieuwe naald op de juiste wijze.
*Kies de juiste voet.
*Gebruik naald en garen dat bij de stof hoort.
22
23
26
Draadbreuk.
*De machine is niet goed ingeregen.
*De draad zit ergens waar hij niet hoort.
*De draadspanning is te hoog.
*De naald is krom.
*Rijg de machine opnieuw in. Controleer het ingeregen
pad.
*Corrigeer de draadspanning.
*Plaats een nieuwe naald.
18-20
-
24
22
De onderdraad breekt.
Steken overslaan.
*De naald is niet goed geplaatst.
*De naald is krom.
*De machine is niet goed ingeregen,
*Plaats de naald op de juiste wijze.
*Plaats een nieuwe naald.
*Rijg de machine opnieuw in.
22
22
18-20
De stof rimpelt.
*De spanning is te hoog.
Naald en draad zij niet afgestemd op de stof.
*Corrigeer de spanning.
* Gebruik naald en garen dat bij de stof hoort.
24
26
De onderdraad verwart
aan de onderkant
van de stof.
*De machine is niet goed ingeregen. *Rijg de machine opnieuw in. 18-20
De machine loopt
moeizaam.
*Stof of stofresten in de grijper. *Maak de grijper schoon. 65
De machine doet
niets als u op de
startknop drukt.
*De garenwinder staat op winden.
*De voetpedaal is aangesloten op de machine.
*Doe de garenwinder naar links.
*Naai met de voetpedaal of haal de
pedaalstekker uit de machine.
15-17
12
De naaldinrijger doet
het niet goed.
*De naald is niet in hoogste positie.
*De naald is niet hoog genoeg ingestoken.
*De machine is verdraaid tijdens het inrijgen.
*Draai het handwiel tot de hoogste positie is bereikt.
*Plaats de naald op de juiste wijze.
*Draai het handwiel een beetje tot de
juiste positie weer is bereikt.
19
22
Onderwerp Specicatie
Afmetingen 410 (B) x 300 (H) x 180 (D) mm
Afmetingen in kap 440 (B) x 305 (H) x 215 (D) mm
Gewicht 7,3 kg, (In kap 8,4 kg)
Voltage
120V / 1,0A 60Hz (USA en Canada)
220-230V / 100W 50/60 Hz
Verbruik Lampje
120V / 15W (USA en Canada)
240V / 15W
69
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-E80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-E80 in the language / languages: English, Dutch, French, Spanish as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info