707751
62
Zoom out
Zoom in
Previous page
1/64
Next page
Seam
puckering
Problem
Cause Correction
1. The needle thread tension is too tight.
2. The needle thread is not threaded
3. The needle is too heavy for the fabric
being sewn.
4. The stitch length is too long for the fabric.
1. Lossen the thread tension.
2. Rethread the machine.
3. Choose a needle to suit the thread and
fabric.
4. Make stitch dense.
Reference
30
16
23
26
5. If you are sewing thin fabric. 5. Sew with stabiliser material under the fabric. -
Patterns are
distorted
1. Select the correct foot.
The sewing
machine
doesn't
operate
The machine
jams
The machine
is noisy
Uneven
stitches,
uneven feed
1. The correct presser foot is not used.
2. The needle thread tension is too tight. 2. Loosen the thread tension .
1. The machine is not turned on.
3. The presser foot lifter is raised.
4. The bobbin winder spindle is in the right
position.
1. Turn on the machine.
3. Lower the presser foot lifter.
4. Return the bobbin winder spindle to the
left position.
Remove the upper thread and bobbin case,
turn the handwheel backwards and forwards
by hand and remove the thread remands.
1. Fluff or oil have collected on the hook or
needle bar.
2. The needle is damaged.
1. Clean the hook and feed dog as described.
2. Replace the needle.
1. Poor quality thread.
2. The bobbin case is threaded wrong.
3. Fabric has been pulled.
1. Select a better quality thread.
2. Remove the bobbin case, the thread and
reinsert correctly.
3. Do not pull on the fabric while sewing, let it
be taken up by the machine.
4. Thread is caught in the hook.
3. Slight humming sound coming from
internal motor.
3. Normal.
5. The feed dogs are packed with lint.
Remove the upper thread and bobbin case,
turn the handwheel backwards and forwards
by hand and remove the thread remands.
1. Thread is caught in the hook.
2. The feed dogs are packed with lint.
2. Connect the power line plug to the electric
outlet.
2. The machine is not plugged in.
28
30
60
60
20
-
60
23
15
-
13
22
13
14
62
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-70 in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info