614557
57
Zoom out
Zoom in
Previous page
1/60
Next page
– 54 –
Falls eine der folgenden Störungen auftritt, ergreifen Sie die entsprechenden Abhilfemaßnahmen, bevor Sie
den Kundendienst anrufen.
Störung Ursache Abhilfemaßnahme
Beim Kippen der Nähmaschine ertönt
der Summer, und die Nähmaschine
kann nicht betrieben werden.
Wird die Nähmaschine gekippt, ohne
den Netzschalter auszuschalten, wird
der links beschriebene Vorgang als
Sicherheitsmaßnahme ausgeführt.
Die Nähmaschine erst nach dem
Ausschalten der Stromversorgung
k
ippen.
Die Magnetspulen für Fadenab-
s
chneiden, Rückwärtsnähen, Wi-
s
cher usw. funktionieren nicht. Die
Handlampe leuchtet nicht auf.
Wenn die Sicherung zum Schutz
der Magnetspulen-Stromversorgung
durchgebrannt ist
Die Sicherung zum Schutz der
Magnetspulen-Stromversorgung
überprüfen.
Die
hmaschine läuft trotz Betäti-
g
ung des Pedals unmittelbar nach
dem Einschalten der Stromversor-
g
ung nicht. Wird das Pedal einmal
nach hinten und dann nach vorn ge-
drückt, läuft d
ie Nähmaschine.
Die Neutralstellung des Pedals hat
sich verändert.
(Die Neutralstellung kann sich z.B.
durch eine Änderung des Pedalfeder
-
drucks verlagern.)
Die automatische Neutralstellungs-
Korrekturfunktion des Pedalsensors
ausführen.
Die
Nähmaschine bleibt trotz ck-
s
tellung des Pedals auf die Neutral-
stellung n
icht stehen.
Der Nähfuß wird trotz Installation der
Auto-Lifter-Vorrichtung nicht angeho-
ben.
Die
Auto-Lifter-Funktion ist deakti-
v
iert.
"FL ON" mittels Auto-Lifter-Funkti-
onswahl einstellen.
Das Pedalsystem ist auf KFL einge-
stellt.
Den
Jumper auf die PFL-Einstellung
umstecken, um den Nähfuß durch
Niederdrücken des hinteren Pedal-
te
ils anzuheben.
Das Kabel der Auto-Lifter-Vorrichtung
ist nicht an den Steckverbinder
(CN37) angeschlossen.
Das Kabel r
ichtig anschließen.
Der Antippschalter funktioniert nicht. Der Nähfuß wird durch die Auto-
Lifter-Vorrichtung angehoben.
Den Schalter nach dem Absenken
des Nähfußes betät
igen.
Die Auto-Lifter-Funktion ist aktiviert,
obwohl keine Auto-Lifter-Vorrichtung
angebracht ist.
"FL OFF" wählen, wenn die Auto-
Lifter-Vorrichtung nicht angebracht
ist.
Die Nähmaschine läuft nicht. Das Motorausgangskabel (4P) ist ab
-
getrennt.
Das Kabel r
ichtig anschließen.
Der Stecker (CN30) des Motorsignal-
kabels
ist abgetrennt.
Das Kabel richtig anschließen.
4. Fehlersuche
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki DDL8700A-7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki DDL8700A-7 in the language / languages: German as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info