614558
13
Zoom out
Zoom in
Previous page
1/14
Next page
– 11 –
22.
ADJUSTING THE FEED TIMING (DDL-8700L)
1) Tilt the machine head and insert a screwdriver from the bottom side of the machine head.
2) Loosen plated screws
2
and
3
in feed eccentric cam
1
, move screw
2
in the direction of the arrow,
and rmly tighten screw
2
. Then tighten screw
3
.
3) For the standard adjustment, adjust so that the top surfce of feed dog and the top end of needle eyelet
are ush with the top surface of throat plate when the feed dog descends below the throat plate.
4) To advance the feed timing in order to prevent uneven material feed, move the feed eccentric cam in
the direction of
A
.
5) To delay the feed timing in order to increase stitch tightness, move the feed eccentric cam in the direc-
tion of
B
.
Be careful not to move the feed eccentric cam too far, or elese needle breakage may result.
When loosening the screws in the feed eccentric cam, if the feed eccentric cam is not properly
adjusted in lateral direction, torque of the sewing machine or seizure of the feed eccentric cam
may result.
1
3
2
B
A
Standard feed timing
Advanced feed timing
Delayed feed timing
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and ascertaining that the motor is at rest.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki DDL8700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki DDL8700 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info