30203
46
Zoom out
Zoom in
Previous page
1/48
Next page
44
4444
44
4. Switch the master transmitter ON. Do not switch on the slave
transmitter; it is only necessary to have the master transmitter switched ON.
5. Push the trainer switch to transfer control to the slave. Release the switch
and control automatically reverts to the master transmitter.
Normal Trainer System
In this mode, all functions are switched from the master to the slave using the
trainer switch. No function setup is necessary to activate this system. Be sure
the slave transmitter’s servo reversing, dual rates, end point adjustment and
trims are identical to the master. This may be checked very easily by pulling
the trainer switch. If the control surfaces move, adjust the slave transmitter
until the trainer switch can be activated without a change to the control surface
position.
Programmable Trainer Function (P.T.F.)
In this mode, the master may assign functions one at a time to make learning
to fly easier for the student. For example, the master may assign the slave
rudder and elevator only. Thus, when the trainer switch is operated, the slave
has control of rudder and elevator only, while the master retains control of
throttle and aileron. Releasing the trainer switch returns all control to the
master transmitter. Be sure to reset the slave transmitter to its defaults by
using the reset function. All servo reversing, pitch and throttle curves etc. will
be taken from the master transmitter.
Use the scroll bar to rotate around the channels and toggle between master
and slave.
Note that when all channels are set to master, the trainer system becomes
NORNAL as indicated by the “NORMAL T.” on the screen.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRpropo PCM9X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRpropo PCM9X in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info