28358
35
Zoom out
Zoom in
Previous page
1/55
Next page
28
4.18 READ OUT DIMENSION OF BEARING
This selects the bearing for heading flush, EBL, cursor and waypoint to work in
either magnetic or true bearings. When magnetic bearing is selected, displayed
character “M” appears. When true bearing is selected, displayed character “T”
appears. This bearing displays only numeric data. The ship’s heading marker is
displayed as 0°direction.
4.19 TRAIL
This feature allows the operator to see the past history of target movement as an
after-glow or trail behind the moving targets. The selecting “short” enables trail,
placing a short after-glow behind the moving targets. Selecting the “long” en-
ables trail with a longer after-glow.
4.20 TARGETS EXPANSION
Target expand mode can be set to on or off. Target expand mode gives the op-
erator the ability to make small targets appear larger on the display for better
viewing. When active, “EXP” is highlighted in the upper left area of the screen.
4.21 REDUCING INTERFERENCE REJECTION
Interference Rejection (IR) mode can be set to on or off. The IR reduces noise
on the display caused by other radars. When active, the “IR” is highlighted on
the upper left of the screen. If you are navigating in a port area serviced by a
RACON, you should turn off the IR mode to see the RACON signals.
4.22 MOB (Man Over-Board)
Pressing the MOB key, will locate a MOB mark over own ship’s present loca-
tion and the range, bearing and TTG to MOB point be displayed in the lower
position of the display. To use MOB, it is necessary to connect with the equip-
ment of the outside of NAV-AID, COMPASS. (Refer to 3.6.2) Moreover, it
isn’t possible to go if not setting BEARING to “T”. (Refer to 4.18)
OPERATION
If you’ll watch the RADAR BEACON and the SART, set the pro-
cess as follows.
IR OFF
CAUTION
28
4.18 READ OUT DIMENSION OF BEARING
This selects the bearing for heading flush, EBL, cursor and waypoint to work in
either magnetic or true bearings. When magnetic bearing is selected, displayed
character “M” appears. When true bearing is selected, displayed character “T”
appears. This bearing displays only numeric data. The ship’s heading marker is
displayed as 0°direction.
4.19 TRAIL
This feature allows the operator to see the past history of target movement as an
after-glow or trail behind the moving targets. The selecting “short” enables trail,
placing a short after-glow behind the moving targets. Selecting the “long” en-
ables trail with a longer after-glow.
4.20 TARGETS EXPANSION
Target expand mode can be set to on or off. Target expand mode gives the op-
erator the ability to make small targets appear larger on the display for better
viewing. When active, “EXP” is highlighted in the upper left area of the screen.
4.21 REDUCING INTERFERENCE REJECTION
Interference Rejection (IR) mode can be set to on or off. The IR reduces noise
on the display caused by other radars. When active, the “IR” is highlighted on
the upper left of the screen. If you are navigating in a port area serviced by a
RACON, you should turn off the IR mode to see the RACON signals.
4.22 MOB (Man Over-Board)
Pressing the MOB key, will locate a MOB mark over own ship’s present loca-
tion and the range, bearing and TTG to MOB point be displayed in the lower
position of the display. To use MOB, it is necessary to connect with the equip-
ment of the outside of NAV-AID, COMPASS. (Refer to 3.6.2) Moreover, it
isn’t possible to go if not setting BEARING to “T”. (Refer to 4.18)
OPERATION
If you’ll watch the RADAR BEACON and the SART, set the pro-
cess as follows.
IR OFF
CAUTION
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC Radar3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC Radar3000 in the language / languages: English as an attachment in your email.

The manual is 3,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info