28358
30
Zoom out
Zoom in
Previous page
1/55
Next page
23
4.6 REDUCING SEA CLUTTER
The sea clutter control is normally used on the shorter ranges to suppress the
effect of sea clutter close to own’s ship.
Press the J-DIAL until the SEA appears highlighted on the upper right corner
of the display. Rotate the J-DIAL clockwise or counterclockwise to vary the sea
clutter control and thus control the strength of echo returns from sea surface
clutter. There is an on-screen bar indication of the sea clutter control level in
use.
4.7 ADJUSTNG RAIN CLUTTER
Press the J-DIAL until the RAIN appears highlight on the upper right corner of
the display. Rotate the J-DIAL clockwise or counterclockwise, to vary the rain
clutter control and thus control the strength of echo returns from rain or snow.
As you rotate clockwise, the return echoes will become narrow and the returns
from rain or snow will be reduced. An on-screen bar indicates the selected rain
clutter level.
4.8 SETTING CRT BRILLIANCE
Press the BRIL/DIM key, and then rotate the J-DIAL clockwise or counter-
clockwise to change the display brilliance.
4.9 SETTING DIMMER
By pressing the BRIL/DIM key, the back light for the panel illumination can be
varied in intensity. Dimmer level is reached at maximum brightness, and the
next level returns the dimmer level to the lowest level (OFF).
OPERATION
On short range scales, the setting of the sea clutter control should
never be advanced so high as to completely obliterate all clutter,
since this setting could prevent the detection of close-in target
echoes.
CAUTION
23
4.6 REDUCING SEA CLUTTER
The sea clutter control is normally used on the shorter ranges to suppress the
effect of sea clutter close to own’s ship.
Press the J-DIAL until the SEA appears highlighted on the upper right corner
of the display. Rotate the J-DIAL clockwise or counterclockwise to vary the sea
clutter control and thus control the strength of echo returns from sea surface
clutter. There is an on-screen bar indication of the sea clutter control level in
use.
4.7 ADJUSTNG RAIN CLUTTER
Press the J-DIAL until the RAIN appears highlight on the upper right corner of
the display. Rotate the J-DIAL clockwise or counterclockwise, to vary the rain
clutter control and thus control the strength of echo returns from rain or snow.
As you rotate clockwise, the return echoes will become narrow and the returns
from rain or snow will be reduced. An on-screen bar indicates the selected rain
clutter level.
4.8 SETTING CRT BRILLIANCE
Press the BRIL/DIM key, and then rotate the J-DIAL clockwise or counter-
clockwise to change the display brilliance.
4.9 SETTING DIMMER
By pressing the BRIL/DIM key, the back light for the panel illumination can be
varied in intensity. Dimmer level is reached at maximum brightness, and the
next level returns the dimmer level to the lowest level (OFF).
OPERATION
On short range scales, the setting of the sea clutter control should
never be advanced so high as to completely obliterate all clutter,
since this setting could prevent the detection of close-in target
echoes.
CAUTION
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC Radar3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC Radar3000 in the language / languages: English as an attachment in your email.

The manual is 3,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info