28360
44
Zoom out
Zoom in
Previous page
1/54
Next page
37
SECTION 5
The purpose of this section is to provide servicing instructions for the service
technician. The RADAR 2000 is designed to provide long periods of trouble
free operation. However, environmental and other factors may required this
equipment to be serviced.
MAINTENANCE
MAINTENANCE
5.1 PREVENTIVE MAINTENANCE
Continuous satisfactory operation of the radar can depend on how well it is
treated. The following maintenance tips can save you time and money, and will
help avoid premature equipment failure.
1. Always keep the equipment as clean as possible. Remove dirt, dust, or wa-
ter-spray from the display and scanner during the boat clean up. These units
are “water resistant” but not “water proof”. Do not immerse.
2. During routine ship’s maintenance, inspect the radar system for the follow-
ing points:
(1) Check all hardware for tightness.
This radar equipment contains high voltage. Adjustments require
specialized service procedures and tools only available to quali-
fied service technicians. There are no user serviceable parts or
adjustments. The operator should never remove the radar unit
cover nor attempt to service this equipment. When servicing this
equipment, it is important that the technician comply with all
safety precautions set forth in this manual.
The high voltage can cause a severe personal injury by the elec-
tric shock.
WARNING
37
SECTION 5
The purpose of this section is to provide servicing instructions for the service
technician. The RADAR 2000 is designed to provide long periods of trouble
free operation. However, environmental and other factors may required this
equipment to be serviced.
MAINTENANCE
MAINTENANCE
5.1 PREVENTIVE MAINTENANCE
Continuous satisfactory operation of the radar can depend on how well it is
treated. The following maintenance tips can save you time and money, and will
help avoid premature equipment failure.
1. Always keep the equipment as clean as possible. Remove dirt, dust, or wa-
ter-spray from the display and scanner during the boat clean up. These units
are “water resistant” but not “water proof”. Do not immerse.
2. During routine ship’s maintenance, inspect the radar system for the follow-
ing points:
(1) Check all hardware for tightness.
This radar equipment contains high voltage. Adjustments require
specialized service procedures and tools only available to quali-
fied service technicians. There are no user serviceable parts or
adjustments. The operator should never remove the radar unit
cover nor attempt to service this equipment. When servicing this
equipment, it is important that the technician comply with all
safety precautions set forth in this manual.
The high voltage can cause a severe personal injury by the elec-
tric shock.
WARNING
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC Radar2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC Radar2000 in the language / languages: English as an attachment in your email.

The manual is 5,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info