28360

JRC Radar2000 Manual

20
Zoom out
Zoom in
Previous page
1/54
Next page
13INSTALLATION
The RADAR 2000 will interface with any NAV-AID (GPS or LORAN) and
compass that has the standard NMEA0182 or NMEA0183 output. The inputs
from NAV-AID will be digital data conforming to the NMEA0183 formats to
drive various radar features such as waypoint mode. If more than one data type
is present at the radar inputs (for example; compass and NAV-AID), a system
priority has been established in the radar’s software to respond to the inputs
driving the features. The assigned priorities are set in this manner:
HEADING: 1. Compass (NMEA0183 “HSC,HDM,HDT,VHW”)
2. NAV-AID (NMEA0183 “RMC,RMA,VTG”)
POSITION: 1. NAV-AID (NMEA0183 “RMC,RMA,GLL,GTD”)
SPEED: 1. NAV-AID (NMEA0183 “RMC,RMA,VTG”)
2. Compass (NMEA0183 “VHW”)
WAYPOINT: 1. NAV-AID (NMEA0183 “RMB,BWC”)
Using the outline of FIG 3-5 as a guide, connect the RADAR 2000 to your
NAV-AID and compass.
① NAV(+) NAV-AID
② NAV(-) NAV-AID
③ COMPASS(+)
④ COMPASS(-)
1
2
6
5
4
3
* View show wire end of Cable Plug/Socket.
FIG. 3-5 EXTERNAL INTERFACE
3.6.2 EXTERNAL SYSTEM INTERFACE
To connect with NAV-AID and/or compass, make sure pin as-
signment, if used same connector.
In case of different pin assignment, the RADAR 2000 or con-
nected NAV-AID will be damaged.
CAUTION
13INSTALLATION
The RADAR 2000 will interface with any NAV-AID (GPS or LORAN) and
compass that has the standard NMEA0182 or NMEA0183 output. The inputs
from NAV-AID will be digital data conforming to the NMEA0183 formats to
drive various radar features such as waypoint mode. If more than one data type
is present at the radar inputs (for example; compass and NAV-AID), a system
priority has been established in the radar’s software to respond to the inputs
driving the features. The assigned priorities are set in this manner:
HEADING: 1. Compass (NMEA0183 “HSC,HDM,HDT,VHW”)
2. NAV-AID (NMEA0183 “RMC,RMA,VTG”)
POSITION: 1. NAV-AID (NMEA0183 “RMC,RMA,GLL,GTD”)
SPEED: 1. NAV-AID (NMEA0183 “RMC,RMA,VTG”)
2. Compass (NMEA0183 “VHW”)
WAYPOINT: 1. NAV-AID (NMEA0183 “RMB,BWC”)
Using the outline of FIG 3-5 as a guide, connect the RADAR 2000 to your
NAV-AID and compass.
① NAV(+) NAV-AID
② NAV(-) NAV-AID
③ COMPASS(+)
④ COMPASS(-)
1
2
6
5
4
3
* View show wire end of Cable Plug/Socket.
FIG. 3-5 EXTERNAL INTERFACE
3.6.2 EXTERNAL SYSTEM INTERFACE
To connect with NAV-AID and/or compass, make sure pin as-
signment, if used same connector.
In case of different pin assignment, the RADAR 2000 or con-
nected NAV-AID will be damaged.
CAUTION
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC Radar2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC Radar2000 in the language / languages: English as an attachment in your email.

The manual is 5,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info