28356
108
Zoom out
Zoom in
Previous page
1/148
Next page
107
Section 3 Operation
RADAR ALARM
There are three kind of radar alarms, guard zone alarm, scanner
rotation stop alarm, and communication line alarm for external heading
sensor.
GZ
Guard Zone IN/OUT alarm.
BZ
Scanner rotation stop alarm. (No Bearing Zero signal
alarm)
COM
Communication line alarm. (No signal input from
heading sensor)
[Setting Guard Zone]
•Select “RADAR ALARM>”, and press
Joystick
, the “RADAR
ALARM” menu is displayed.
Refer to “Setting GUARD ZONE”. (Refer to p.67)
BZ ALARM
•This function sets the time that the alarm sounds when the rotation
signal, (hereafter BZ signal) is discontinued.
Normally the time for the BZ signal error alarm is continuous.
It will continue to sound continuously as long as the user does not
push the "CLR" key.
The time setting can be from 10 seconds to 60 seconds or continuous.
When the Interswitch kit is installed. And, a limited value is set.
When the antenna access is taken over from the other display unit and
the display unit is using the antenna in transmission status. Then,
after the specified time, the BZ signal error occurs when the rotation
signal from the antenna is cut off, which should be used only when
automatically turned OFF.
In the normal case (No Interswitch kit), be sure to set it to
"CONTINUOUS".
WARNING
Perform BZ alarm settings with the owner's
authority.
When the BZ setting time is limited, monitor
the alarm constantly. If the antenna is
stopped, and the alarm function stops with
out being noticed, it could be dangerous, be
careful.
BZ ALARM
CONTINUOUS
108


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC Radar1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC Radar1800 in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info