28356
105
Zoom out
Zoom in
Previous page
1/148
Next page
104
Section 3 Operation
USE THE PC
•Select USE THE PC to display the MEMORY COPY - PC menu.
Notes:
•To use this function, it is necessary to install the communication tool
exclusive for the PC. This communication tool is not attached to the
RADAR 1800. Please download it from our Internet site. (URL is found
on the backside of the manual). This communication tool is free.
•Use an RS-232C cable (9-pin cross type) sold commercially to connect the
RADAR 1800 and the PC. (Refer to p.40)
• This function cannot be used while Navigation is active.
Transferring data to a PC
You can upload data from the RADAR 1800 to PC.
Follow the procedure described below.
Refer to the manual attached to the communication tool for
detailed information about how to operate the communication tool.
q Set the PC communication tool to the reception status.
w Select RADAR1800 > PC and press
Joystick
.
The data select menu appears.
e Select the data to send and press
Joystick
to start transmmision..
r When the transmission is completed, the message “COMPLETE!”
appears.
Note:
•If the transmission is terminated due to the line failure, the message
“ERROR!” appears. In this case check again whether the cable is broken, a
proper cable is used, and so on.
Receiving data from a PC
You can download data from the PC to the RADAR 1800.
Follow the procedure deseribed below.
Refer to the manual attached to the communication tool for
detailed information about how to operate the communication tool.
q Select PC > RADAR1800 and press
Joystick
.
The RADAR 1800 gets ready to receive data from the PC.
The RADAR 1800 enters the standby mode during transmission.
w After selecting the data to send using the communcation tool, start
transmission.
e When reception of data from the PC is completed, the message
“COMPLETE!” appears.
To abort reception, press and hold
BR
BR
T/CLR
T/CLR
for more than three
seconds.
MEMORY COPY
-
PC
RADAR1800
>
PC
PC
>
RADAR1800
MEMORY COPY
PC
WPT&ROUTE
TRACK
MARKS
SETTING
105


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC Radar1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC Radar1800 in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info