28356
53
Zoom out
Zoom in
Previous page
1/148
Next page
52
Section 3 Operation
[Numeric Data]
DPT : Depth
SOG : Speed (Over Ground) (unit: KTS=knots, KPH=km/hour,
MPH=mile/hour)
WPT: Waypoint ID
COG:Vessel course over ground (unit: degree/ T=true,
M=magnetic)
BRG :Bearing to destination (unit: degree/ T=true, M=magnetic)
RNG: Distance to destination (unit:0.1 NM)
XTE : Cross track error. Deviation from course and direction to
steer (unit:0.1 NM)
Steering required to return to the planned course is indicated
t (Left) and s (Right)
Notes:
•To display the vessel heading marker and HDG (Vessel heading), it is
necessary to receive the vessel heading data in the NMEA0183 standard
format. You need to connect the specified signal line to the NMEA
connector or DC12V/ COMPASS connector on the rear panel to receive
the vessel heading data.
•To display the water depth data, it is necessary to receive the depth data in
the NMEA0183 standard format. You need to connect the specified signal
line to the NMEA connector on the rear panel to receive the water depth
data.
NUM DATA Mode
Select NUM DATA to display the numeric display. The numeric
display includes the numerical data of various navigation information
such as water depth, vessel speed, course, heading direction, deviation
from the course, your vessel’s position, and so on. To display the
information mentioned above, however, it is necessary to connect a
GPS/DGPS sensor (optional) and activate Navigational equipment.
Notes:
•To display the vessel heading marker and HDG (Vessel heading), it is
necessary to receive the vessel heading data in the NMEA0183 standard
format. You need to connect the specified signal line to the NMEA
connector or DC12V/ COMPASS connector on the rear panel to receive
the vessel heading data.
•To display the water depth data, it is necessary to receive the depth data in
the NMEA0183 standard format. You need to connect the specified signal
line to the NMEA connector on the rear panel to receive the water depth
data.
•To display the speed through the water (STW), it is necessary to receive the
speed through the water data in the NMEA0183 standard format. You
need to connect the specified signal line to the NMEA connector on the
rear panel to receive the water speed data.
OFF COURSE SHALLOW
SOFT
KEY
SOFT
KEY
SOFT
KEY
SOFT
KEY
N 42° 34.255'COG 92.5° DGPS
W122° 19.487'SOG 25.5KTS
WPT
001 ABCDEFGH
ETA
21 OCT 10:54AM
RNG
NM
15.7
HDG
°
T
82
.
5
SOG
KTS
25
.
5
COG
°
T
92
.
5
STW
KTS
20
.
3
BRG
°
T
72
.
5
DPT
FT
69
.
3
0.02
XTE
VESSEL POSITION
21 OCT 8:28AM
N 4 2 ° 5 1 . 8 1 8 '
W 8 7 ° 5 1 . 1 3 6 '
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC Radar1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC Radar1800 in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info