28350

JRC JMA9933SA Manual

272
Zoom out
Zoom in
Previous page
1/404
Next page
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
8-40
８
7 To change the quantization level, enter a new value using any
of 0 to 9 or + and - , and press END to set it.
1 Click EXIT .
The ADJUST Menu will be closed.
2 Click EXIT .
The CODE INPUT Menu will be closed.
3 Click EXIT .
Control will be returned to the MAIN Menu.
Do not change the quantization level LOW LEVEL.
Adjustment of NSK Unit to Gyro Compass and Log･･････････
The NSK Unit of the radar equipment is of solid-state type and designed to be compatible
with almost all types of gyro compass by switch operation (For the step motor type, 35 V
DC to 100 V DC, and for the synchro-motor type, the primary excitation voltage is 50 V AC
to 115 V AC). Before power-on operation, the switches S1, S2, S6 and S7 on the NSK
Unit (CMJ-462) shall be set to the type of gyro compass in use in accordance with the
procedures as described below. The gyro select switch on the NSK Unit is set to the
gyration ratio of 360X and to be compatible with the synchro type before delivery from
factory. Check the type of the gyro compass used in own ship and make settings in the
procedures below. For further details, refer to Fig. 127 Setting Table of Gyro Compass
and Gyro Select Switches of Display Unit, Type NCD-4263.
① Set the switches and jumper of the NSK Unit (CMJ-462) before tuning on the radar
equipment.
• S5: Set it to [OFF].
• S6, 7: Set this switch assembly according to the particular type of gyro.
S6, S7･･･････････････ ｢UP｣･････････ Step signal
｢DOWN｣･････ Synchro signal
• S1-1 to 4: Set this switch assembly according to the particular type of gyro.
S1-1･･････････････････ Set this switch assembly according to the
particular type of gyro.
｢UP｣･････････ Step signal
｢DOWN｣･････ Synchro signal
S1-2, 3････････････････ Gyration ratio
Gyration ratio S1-2 S1-3
36×
ON ON
EXIT
… 272 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC JMA9933SA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC JMA9933SA in the language / languages: English as an attachment in your email.

The manual is 7,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info