28350
257
Zoom out
Zoom in
Previous page
1/404
Next page
8-26
Replacement of PARTS Periodically・・・・・・・・・・・・・・・・・・・・・
The parts shown below, it is need to exchang periodically.
Replacement of Magnetron (V1/V101/V201)・・・・・・・・・・・・・・・・・・
Remove the shield cover of the modulator and check that no charge remains in the
high-voltage modulator circuit. Then, remove the socket of the magnetron. The
magnetron can be demounted by removing the screws fixing it. When mounting a
new magnetron, do not touch the magnet with a screwdriver or put it on an iron place.
After replacement, connect the lead wire correctly.
Handling of Magnetron under Long-Time Storage
The magnetron that has been kept in storage for a long time may cause sparks and
operate unstably when its operation is started. Perform the aging in the following
procedures:
(1) Warm up the cathode for a longer time than usually. (20 to 30 minutes in the
STBY state.)
(2) Start the operation from the short pulse range and shift is gradually to the longer
pulse ranges. If the operation becomes unstable during this process, return it to
the standby mode immediately. Keep the state for 5 to 10 minutes until the
operation is restarted.
(3) After transmission is made for about 15 minutes, conduct the tuning adjustment.
(4) Adjust RV1 within the receiver so that the bar graph of the tuning indicator on the
display reaches the reading 10 without saturation.
Parts Exchange Standard
1. Magnetron 4,000 hours
2. Motor 10,000 hours
3. LCD 50,000 hours
4. Fan Motor 20,000 hours
5. Lithium battery 3 years
257


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRC JMA9933SA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRC JMA9933SA in the language / languages: English as an attachment in your email.

The manual is 7,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info